Your battery is one of the heaviest components in your vehicle. On top of that, battery placement in your hot rod or race car can be a tricky task with stock mounts or traditional mounting locations. Make battery relocation easy and economical with our Remote Mount Weld-In Battery Box Tray. This universal battery box allows you to place the battery where you need it and can be used in almost any street or race application where the box can be welded to a frame, firewall, sub-assembly, etc., and has sufficient clearance to fit.
Each side of the battery tray has 2” hangers making it easy to weld a secure mount to the top of the frame rail, or on top of a firewall. For street rods, this battery box makes it easy to relocate your battery when you have limited space under the hood or in the trunk. For racing applications, optimize your weight distribution by mounting the battery where you see fit.
This battery box is American made of heavy duty 16-gauge steel, welded, and comes in a natural finish so you can paint/powder coat/plate the assembly to your needs. The base plate is drilled out for lightness without sacrificing strength.
A wide range of batteries can be used. The battery tray measures 11” L x 9.5” W x 6.63” H and fits 37 different battery group sizes up to 10” L x 7.25” W x 9” H (see notes section for full set of battery groups). A hold-down angle bar is included with coarse-thread, zinc plated J-bolts, washers and nylock nuts to keep your battery held down tight.
Stop struggling around the battery and let our Remote Mount Weld-In Battery Box Tray be a simple and economical solution to battery placement.
- Relocate the battery from tight locations to where you have more room with a secure and economical weld-in solution
- Has 2” hangers on each side to weld on top of frame rail, firewall or any location which has sufficient clearance
- Durable, welded 16-gauge steel, drilled for weight reduction
- Natural finish permits you to grind and modify the box, then plate/paint/powder coat to your desired finish
- Perfect for street applications where under-the-hood or trunk locations may have limited space
- Race applications allow relocating the battery for ideal weight distribution
- Measures 11” L x 9.5” W x 6.63” H overall and fits a wide range of battery sizes up to 10” L x 7.25” W x 9” H (see notes for battery group codes)
- Includes hold-down angle bar, zinc-plated J-bolts, washers and nylock nuts to keep battery held down tight
- Fits batteries measuring 10” long x 7.25” wide, with a height up to 9”. Can also be used with batteries taller than 9" by using longer J bolts.
- Would work with most batteries in the following groups: 2N, 17HF, 21, 21R, 22, 22F, 22HF, 22NF, 22R, 25, 26, 26R, 35, 42, 45, 47, 51, 51R, 52, 54, 55, 56, 57, 58, 58R, 61, 62, 70, 71, 72, 73, 75, 85, 86, 90, 96R, and 97R
We use these in every build
Summary: We use these in every build
Works great for the racecar
Summary: Work great for my circle track car
Cons: Thin to weld Had to turn down the heat a lot
Works great for my circle track car
Summary: Works great had to the down the heat cause it's thin
Yes, I recommend this product.
yes
Summary: building classic cars and using some of your products makes the job easier.
Yes, I recommend this product.
Good product. Worked as planned
Summary: Went in the trunk of our race car. Great fit. Good hold on the battery.
Yes, I recommend this product.
