eBay

ACE OF SPADES ROOF DECAL KIT

This kit is supplied in 3 sections, so each section needs to be applied to the relevant position on your minis roof. This decal is comparable with the Mini Hatch, Clubman, Countryman, and the classic Mini's.

The decal will not be suitable for the roof of a coupe, unless you apply it without the corner sections.

Larger decals are always posted out using postal tubes. We use Hermes as standard for our courier. You can upgrade to another courier on checkout, if you would prefer us to use someone else. Please be aware that we cannot take responsibility for a poor courier service. If an item is lost in the post, we will send out a replacement, unless you have purchased it using the global shipping programme. We hope that you can be understanding. Please ensure that your postal address is correct, as if an item is returned to us, you will not be refunded for the courier charges. Our handling and manufacturing time is usually 3 working days. We will always try our best to send items out as fast as possible. Please be aware that sometimes this can unfortunately be slightly longer during busier periods.

* Our decals always come with application tape applied. *

Colour choices

Gloss Black

Matt Black

White

Silver

Anthracite

Sky Blue

Dark Red

Bright Red

Hot Pink

Orange

Forest Green

Light Green

Gold

We always recommend using a wet installation method to install decals. This allows you to position the decals once they are on the vehicle.

You will need to create an application fluid using water and a drop of either dishwashing liquid, or baby shampoo.

Step One;

Clean the vehicle, and ensure the surface is dirt and grease free. We recommend using a degreasing agent such as washing up liquid, or baby shampoo to ensure the surface is prepped correctly.

Step Two;

Use the application fluid to wet down the surface where the decal will be placed.

Now you can peel back the application tape, which will contain your decal. If the decal doesn't lift with the application tape, place the application tape back into position, and using your thumb apply firm pressure to the application tape over the decal. This will allow it to grab the decal again. You can now try to lift the decal again, being cautious not to contaminate the back with any dirt or dust.

Now apply your application fluid to the back of the decal.

Once you have done this, place the decal onto your vehicle in the desired location. Reposition it to the correct position you would like it.

Step Three;

Using a squeegee, apply the decal to the vehicle. You need to be pushing all the water out to the sides.

Once you have done this, you will need to spray the application tape on the back, to wet it down.

We then recommend leaving it to stand for an hour or two, to make the application tape easier to remove.

You can now proceed to remove the application tape.

Unfortunately we are unable to accept returns on items, due to them being customised. This is covered under the sales of goods act.

If however for any reason we agree to the item returned, you must return it in the original condition it arrived.

If for any reason the item arrives damaged, you must take photos of it immediately before opening it. The photo must also show the couriers label, as they require this to open a claim. Once the claim is approved, we can either send out a replacement, or offer you a refund.