Product Specifications:
Part Number: HP 74XL 75XL
Condition: Re-manufactured
Page Yield:
Black: 750 Pages at 5% Coverage
Color: 520 Pages at 5% Coverage
Package Qty:
1 - HP 74XL Black Ink Cartridge (CB336WN)
1 - HP 75XL Color Ink Cartridge (CB338WN)
Weight: 0.5 lbs Compatible for: HP - Deskjet D4260 D4263 D4268 D4280 D4360 D4363 D4368 HP - OfficeJet J5725 J5730 J5735 J5738 J5740 J5750 J5780 J5783 J5785 J5788 J5790 J6405 J6410 J6413 J6415 J6424 J6450 J6480 J6488 HP - PhotoSmart C4200 C4205 C4210 C4225 C4235 C4240 C4250 C4270 C4272 C4273 C4275 C4280 C4283 C4285 C4288 C4293 C4294 C4300 C4340 C4342 C4343 C4344 C4345 C4348 C4380 C4382 C4383 C4384 C4385 C4400 C4410 C4424 C4435 C4440 C4450 C4470 C4472 C4473 C4475 C4480 C4483 C4485 C4488 C4493 C4494 C4500 C4524 C4540 C4550 C4575 C4580 C4583 C4585 C4588 C4599 C5200 C5225 C5240 C5250 C5270 C5273 C5275 C5280 C5283 C5288 C5290 C5293 C5500 C5540 C5550 C5580 D5300 Series D5345 D5360 D5363 D5368
Troubleshooting:
Error Message - "Not Recognized", "Cartridge is Missing/Damaged","Incompatible/Unsupported Cartridge Installed"
If
you see one of the above error messages, remove the problem cartridge
from its cradle inside the printer, and double check the copper strip is
intact. Then, take a PENCIL ERASER, and firmly eraser over the
contacts, then gently brush away any debris. Re-install the cartridge
into the printer. If the problem persists, reset your printer by:
1. Turn off computer AND printer with cartridges installed
2. Unplug printer and leave everything off for 2 minutes
3. Restart printer AND computer and attempt to print again.
If the problems continue, please contact us for a replacement.
Error message - "Low Ink", "Empty"
Please
keep in mind that if you see a "low ink" error message, this is VERY
common with remanufactured cartridges. To continue printing, press/hold
the stop/reset button or the resume button for 10 seconds.
If you cartridges do not work to the expected page yield, please contact us for a replacement.
Poor print quality:
If
the print quality is inadequate, please follow the below instructions
to run a cleaning cycle (may vary between printer models- for additional
instructions, please consult your printer's user manual):
1. On your printer, press 'Menu' until you see 'Maintenance'.
2. Use arrow keys to scroll to 'Cleaning'. Press 'OK' to initiate cleaning cycle.
If the test page is not satisfactory, you can perform another cleaning cycle.
If the problem persists, please remove the cartridge from the printer and locate the printhead on the bottom side of cartridge.
1.
Take a lint free cloth (i.e. coffee filter) fold it in half, and hold
the cartridge (printhead side down) against the coffee filter for 3
seconds.
2. Lift the cartridge and you should see a blot if ink on the coffee filter.
3. Reinsert the cartridge into the printer.
If the problem persists, please contact us for a replacement.