New 2010-2015 Chevy Camaro Plug n' Play DRL Harness
2010-2013 Camaro DRL Harness Adapter: Allows the Camaro's daytime running lights to function at night also.
Your daytime running lights will continue to function normally during daylight. With the DRL Harness Adapter installed into the Camaro's existing factory wiring harness, once you turn the car's lights on at night the daytime running lights will also turn on.
This is a great added feature for your Camaro without modifying or altering the factory wiring harness. Manufactured with GM Delphi connectors, terminals, and terminal position locks.
Harness includes inline diodes (only allows power to flow in one direction) to prevent any feedback to the system computer.
*One harness functions both lights*
This Will Fit ALL 2010-2015 CAMARO'S With RS package (Does not work for 2012-2013 ZL1)
The DRL Fog Light Adapter Harness allows you to run your DRL/Fog Lights at the same time as your halo or headlights. The harness will allow your DRL/Fog Lights to operate normally during the day, but they will also turn on with your parking lights at night.
Features:
- Simple plug and play installation that only takes 5-10 minutes
- Only one harness required for BOTH DRL/Fog Lights
- Allows you to drive with your factory halos and fog lights on simultaneously
- Includes inline diodes for protection; voltage can only flow in one direction to prevent feedback
- Made of high quality, automotive grade GM Delphi connectors, locks, terminals and seals
- Compatible with all 2010-2015 Chevrolet Camaros
Installation Instructions:- Turn the steering wheel all the way to the left. This will give you access to the passenger side fender well liner.
- From the passenger side, remove the 3 TORX screws (T20) that hold the fender liner to the bumper. Pull the plastic shroud/fender liner back near the DRL/Fog Light to allow space for your hand to reach inside.
- Reach your hand and locate the harness coming from the DRL/Fog Light. Follow this harness down until you feel the end of the connector harness.
- Unplug the connector harness and insert the DRL adapter harness in between both ends of the connector. Verify operation to make sure it works properly before reinstalling the TORX screws.
Package Include: