itc-308 temperature controller greenhouse thermostat reptile heat mat greenhouse heaters homebrewing

INKBIRD ITC-308 (220V)Temperature Controller Digital Thermostat ,With output power of 2,000W(220V)
it can be used for most applications such as #homebrew, #aquarium, #petbreeding, #incubation, #seedling, #terrestrialheating, #fermentation, #germination and etc.

Features: 
- Plug and play design, easy to set and use,F/C degree display;
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
- PV and SV dual display window, be able to display measured temperature and set temperature at the same time; 
- Support reading with Centigrade or Fahrenheit unitMaximum output load: 2400W(240V);
- Compressor delay protection for refrigeration control High and low temperature alarms are available; 
Over-temperature and sensor fault alarm Temperature calibration; 
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. 
- The sensor is waterproof and is better for the freshwater tank than the saltwater tank.

Specification:
- Temperature Control Range : -50~120°C / -58~248°F 
- Temperature Resolution: 0.1 °C / 0.1°F Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160°F) 
- Temperature Control Mode :On/Off Control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz 
- Temperature Control Output: Max. 10A, 100V ~240V AC  (It can apply to the voltage from 100V to 240V)
- Buzzer Alarm: High and Low 
- Socket: 112 x 46 x 27 mm( 4.1 x 1.8 x 1.0 inch)
Sensor Type: NTC sensor (Including) Sensor Length: 2m / 6.56ft 
- Ambient Temperature: -30~75°C / -22~167°F 
- Storage Temperature: -20~60°C / -4~140°F
- Humidity 20~85%Rh (No Condensate) 
- Warranty: 1 Year 

How to work: 
Connect with a heater and a cooler , heating socket for heater,cooling socket for cooler.
The temperature range you want to control is: 22~30℃ ,then you can set TS=25℃, HD=3,CD=5.
When Ambient Temperature is higher than 30℃(TS+CD), it will turn on the cooler, turn off at 25℃.
When Ambient Temperature is lower than 22℃(TS-HD), it will turn on the heater, turn off at 25℃.

Package Included:
1x ITC 308 Temperature Controller  (EU Plug)
1x English User Manual
DataCaciques