You are buying a complete assembly kit at this auction. Adhesive 3M sensor pad + 3M vhb primer.
I fit the following cars:
PRODUCT DESCRIPTION AND ASSEMBLY MANUAL ...
Optical connection of the sensor with the glass.
It is an acrylic pad for the rain
sensor, firmly sticking the sensor plate to the glass. The pad is 100%
transparent, just like the glass.
Installation instructions:
The assembly is
quite difficult, you need to be patient and precise while working. The main
problem is cutting off and cleaning the sensor plate from the old pad so as not
to damage it.
1. Detach the sensor from the sensor plate.
2. The disassembled sensor plate and the glass should be thoroughly cleaned off the remains of the old sensor. Clean the glass with a razor blade and degrease it. Try to break the old pad off the sensor plate by pressing down firmly with your thumb. Sometimes she manages to curl up like that. If it is impossible, you will have to use a razor blade (be careful not to cut the tile), then you can use 800 grit sandpaper to smooth the tile, especially if it has been cut.
3. Peel the protective foil from the pad first, the jelly is very tear-resistant, do not be afraid and pinch it firmly with your fingers, the foil with one hand and the jelly with the other.
4. Apply VHB primer on the new (VHB pad) and apply VHB primer to the pane, preferably with a clean finger, maybe wearing a rubber glove.
5. Place the VHB washer ON THE PANE FIRST (wet, do not wait for the primer to dry) and apply pressure to remove air bubbles.
6. Now peel off the protective paper, and cover with the primer, the VHB pad and the sensor plate.
7. Place the sensor plate against the glass to which the VHB pad has been glued earlier, this operation should also be performed when wet and pressed to remove air bubbles.
8. Heat the glass and then the tile using a blow dryer or heat gun to speed up the bonding of the VHB adhesive.
9. Leave to dry for approx. 45 minutes.
10. When
everything is ready, everything can be assembled and operation checked.
If
you have any questions, write an e-mail