eBay

Features
Wireless dental curing light with charging
5W high power LED
With a maximum more than 1500mW/cm²
Constant light intensity. The solidification effect is not affected by the consumption of remaining power
Elegance design, very convenient for operation
Noiseless operation
Low battery alert
Three working models: strong, gradually strong, flashing
The special design of charger base can be also used for holding the handle
It can solidify 2-3mm deepness in a few seconds
Can be used Worldwide 110V-240V
With blue high sensitive brightness, can cure the resin which the wavelength of 420-460nm
Long standby time of 90 days or more
Suitable for all brands of resin materials
High capacity lithium battery

Specifications
Capability of battery: 2200mA/h 3.7V
Input Voltage: 110-240V, AC, 50-60Hz
Wavelength: 420-460nm
Light power: 1500mW/cm²
Solidify depth: 5s/3mm
Solidify select: 5s-40s
Battery standby time: 90 days
Full charging to work with 20s each time, can be used continuously more than 200 times

Packing List:
Curing light machine
Light Screen
Guide light head(1pc)
USB Cable
Operating instruction

Operating instruction:

Mode	Work time	Function
Bright light mode	1s, 3s, 5s，10s	Achieve fast curing
Pulse mode	5s，10s, 15s, 20s	Intermittent pause to release contraction stress
Tapering mode	5s，10s, 15s, 20s	Reduce shrinkage and prevent microosmosis

1.Product property:

This product uses pure blue light emitting light source, wavelengthrange of 450-460nm, can cure the dentalligh curing composite resin on the market. The machine adopts miarocomputer ntelligent control, the working time can be adjusted according to the need, and displayed on the display sareen, easy touse.

2.Pack list:

Curing light machine Iset

Guide light head 1 piece

Wire 1 piece

Light screen 1 piece

Operating instuction 1 book

3.Product usage scenarios

Aestheticrepair

Orthodontic bonding

Whitening gumprotection

Post-implant repair

Repair after root canal treatment

4.Notes, warnings, and tips

A. The continuous use interval of this product shall be greater than 40S

3. Do not tunit on when charging.

c. Donot use the ight souce to the eyes instal the shadngbeftoe uingoavoidbluelgt damage to the eyes.

D. Disinfection: This product is wiped and dsineted withalcohol.

E. The local magnetic feld is less afeted. but also far away form the magnetic field, to avoid inteference with the equipment.

F.This machine and accessories should be scrapped according to the local regulations after the end of ther service life.

G. The lamp head is 360 rotation and the doctor adjuss cordng to the use.

H.This product does not prevent flli and users are advised to pay aattention to placing and avoild breaking in the use process

I. This product is only used by medical personnel with pofesiona qualficaion

5.Instructions for use

. Charging: after charging connecfionhead, insert the power cordirectlyat the bottomof the host Type -C intertace can be recharged. The indicato lights blue whenitis charged, and turns green whenitis full,

. Guide baldheaded isalltlion: direct connectlight head can be used to host the connecfion infront of the mouth, guide bald head canrotate 360* meet dlfet use requirements.

, Defidiency of host will send out alarm, display shows LO prompt charge.

. Machine without operafionwill automatically shut downafter 10s.

. Full of electicity canbe continuoususe about 200 times more.

. This product does not provide the power adapter, users can charge the battery using mobile devices suchas head of the host to charge.

6.Operating instruction

Brightlight mode ls, 3s,5s, 10s Achieve fast curing

Pulse mode 5s, 10s, 15s, 20s Intemilent pouse to release contaction stress

Tapering mode 5s, 10s, 15s, 20s Reduce shrinkage and prevent microosmoss

.Press the P key to power on. The indicator under the curent mode will be steady on, and the sreen wil display the working time in this mode.

. Press the Mkey to switch to dfferent modes.

. Long press the M keyfor 35 then drop"release. and the indcato flashes to adjust the fime. Press the Mkey to switch mode. press the P key to switch the requred working time, the

machine will automatically confirm atter no operation

7 Product maintenance and maintenance methods

. After charging. the power supply should be dkcomected to extend the botlery le

. The appearanco of the machine has stains, can be used to wipe the surface of the machine . Daly toubleshooting methodk ae shown in the ollowin lable

8.Transportation and storaae conditions

Ambient temperature range-40c -55C

Relative humidity range of 80%

Transportation Transportafionrequirements according to the contrac provisions, should avoid rain and snow splashing andmechanical colision

Storage: the packaged LED light curing machine should be stored in anon-comosive gas and wel-ventilated room, temperature and humidity according to the factoryrequirements.

9.Technical parameters

Safety type: Classlintenal power supply Type B. Discontinuoususe type. Product name: light cring machine

Product modet:LA400

Battery. Rechargeable lithiumbattery

Battery capacity: 200mAh

Battery oltge:3.V

Bilue wavelength: 450-460nm

Blue ight intensity: 1500-2300mw/cm2

Working conditions: Working temperatre:5-40c

Operating humidity: <80%RH

Atmospheric pressure range: 75KPa-106KPa

10.After-sale service

A. This product tomthe date of sale. within 30 davs there š aqulyproblemeplacement the product connot wark properly withina yea due tofaultproblems the manulacturer 8 responsible for free maintenance.

B. There is one of the folloling dircumstances onlyfor charging maintenance:

.Damage caused by the users falue to operate. maintain orkeep according to the : Damogecarieuers carelessness:

.Because the user dsassembles the machine:

. Damaged byusensusinginoppropriate powersupply

. No waranty cardor purchase voucher, o leredby oneset

. after or damage the maks on the machine;

. the waranty card page is incomplete;

. Damage caused by resistible factors

. Beyond the period of free maintenance.

Payment
1.We only accept payment by Paypal.
2.Please make sure you PayPal account is valid prior bidding.

Feedback
We commited ourselves to your 100% satisfaction both with our goods and services.
1. Please leave me FIVE star POSITIVE feedback if you are satisfied with our items.
2. Please CONTACT me immediately before leave us neutral feedback or negtive feedback, We will try our best to resolve any problem for you untill you are satisfied.
Pls let me know before taking any action, because your action will has an important impact on our shop.
So pls give me a chance to offer the best sollution for you!!

About US
We're one of the largest online dental suppliers based on our own qualified manufacturers in China.
We supply all dental items with very nice qualities and the best reasonable prices for worldwide dentistry students, dentists and other professionals.
Looking forward to our friendly & win-win cooperation.
Our working time: Monday - Friday 9:00 AM - 5:30PM (Beijing)

Company name: Dreamland Technology Ltd
City, State: Beijing, China
Telephone number: 0371-56645662
The following FDA Disclaimer is required.

REFERENCE:
Statement：The sale of this item may be subject to regulation by the U.S. Food & Drug Administration and state and local regulatory agencies.You can bid on this item if you are an authorized purchaser. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item.If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health.(This dental items is not meant to replace your doctor diagnostic. It is mainly for your piece of mind and comfort.)
This item has been cleaned and treated according to the manufacturer's instructions.
FDA for Curing Light: 510(K) Number: K192233, Regulation Number: 21 CFR 872.6070, Product Code: EBZ
FDA for Handpiece: 510(K) Number: K181691, Regulation Number: 872.4200, Classification Product Code: EFB, Subsequent Product Code: EGS

FDA for Scaler: 510(K) Number: K163414, Regulation Number: 872.4850, Product Code: ELC

On Nov 1, 2023 at 20:32:49 PDT, seller added the following information:

On May 2, 2024 at 15:26:14 PDT, seller added the following information: