4G LTE GPS Module HAT Starter Kit for RPI Raspberry Pi Zero 2 W 3 Model B Plus 4

PACKAGE CONTENT:  （ NOT included Raspberry Pi .）

 

Wiki English manual :      waveshare.com/wiki/SIM7600G-H_4G_HAT



  1. SIM7600G-H 4G HAT x1

  2. LTE Antenna x1

  3. GPS External Antenna  x1

  4. USB Cable x2

  5. RPi Screws Pack  x1

12345
 
English manual:
 
www.waveshare.com/wiki/SIM7600G-H_4G_HAT
 
The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.

You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.

Features

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
  • Supports GPS, BeiDou, Glonass, LBS base station positioning
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
  • Onboard CP2102 USB to UART converter, for serial debugging
  • Breakout UART control pins, to connect with host boards like Arduino/STM32
  • SIM card slot, supports 1.8V/3V SIM card
  • TF card slot for storing data like files, messages, etc.
  • Onboard audio jack and audio decoder for making telephone call
  • 2x LED indicators, easy to monitor the working status
  • Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps)
  • Autobauding baudrate: 9600bps ~ 115200bps
  • Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT                                                         
 
 
 
LTEWCDMA / TD-SCDMA / CDMA 2000EDGEGSM/GPRS
BandSIM7600A-H:
LTE-FDD B2/B4/B12		SIM7600A-H:
UMTS/HSPA+ B2/B5		Not available
SIM7600E-H:
LTE-FDD B1/B3/B5/B7/B8/B20
LTE-TDD B38/B40/B41		SIM7600E-H:
UMTS/HSPA+ B1/B5/B8		GSM/GPRS/EDGE 900/1800 MHz
SIM7600CE-T:
LTE-TDD B38/B39/B40/B41
LTE-FDD B1/B3/B8		SIM7600CE-T:
UMTS/HSDPA/HSPA+ B1/B8
TD-SCDMA B34/B39
CDMA 1X/EVDO BC0
SIM7600G-H:
LTE-TDD B34/B38/B39/B40/B41
LTE-FDD B1/B2/B3/B4/B5/B7/B8
/B12/B13/B18/B19/B20/B25/B26/B28/B66		SIM7600G-H:
UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19		SIM7600G-H:
GSM/GPRS/EDGE 850/900/1800/1900MH
Generation4G3G2.5G2G
Emitting power0.25W0.5W@EGSM900
0.4W@DCS1800		2W@GSM900
1W@DCS1800
Data SpeedLTE CAT 4
Uplink≤50 Mbps
Downlink≤150 Mbps		UMTS
Uplink≤384Kbps
Downlink≤384Kbps		EDGE
Uplink≤236.8kbps
Downlink≤236.8kbps		GPRS
Uplink≤85.6kbps
Downlink≤85.6kbps
 HSPA+
Uplink≤5.76Mbps
Downlink≤42Mbps		  
SIM CardNormal SIM (Not Included)

GNSS Specifications

  • Receiver type
    • 16-channel
    • C/A code
  • Sensitivity
    • Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
    • Cold starts: -148 dBm
  • Time-To-First-Fix (open air)
    • Cold starts: <35s
    • Hot starts: <1s
  • Accuracy
    • Position: <2.5m CEP

SMS and Audio Specifications

  • SMS
    • Supported types: MT, MO, CB, Text, PDU
    • Storage: USIM card and ME (default)
  • Audio feature
    • Supports echo cancellation
    • Supports noise reduction

Other Specifications

  • Power supply: 5V
  • Operating voltage: 5V/3.3V (configured via jumper)
  • Operating temperature: -30°C ~ 80°C
  • Storage temperature: -45°C ~ 90°C
  • Dimension: 56.21mm x 65.15mm

What's on Board

  1. SIM7600G-H
  2. CP2102 USB to UART converter
  3. NAU8810 audio decoder
  4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
  5. MP2128DT power chip
  6. MP1482 power chip
  7. Raspberry Pi GPIO header: for connecting with Raspberry Pi
  8. SIM7600 control interface: for connecting with host boards like Arduino/STM32
  9. SIM card slot: supports 1.8V/3V SIM card
  10. TF card slot: allows file/SMS/... storage
  11. 3.5mm earphone/mic jack
  12. USB interface: for testing AT Commands, getting GPS positioning data, etc.
  13. USB to UART interface: for serial debugging, or login to Raspberry Pi
  14. MAIN antenna connector
  15. AUX antenna connector
  16. GNSS antenna connector
  17. Power switch
  18. Network status indicator
  19. Power indicator
  20. Operating voltage selection jumper:
    VCCIO - 3.3V: set operating voltage as 3.3V
    VCCIO - 5V: set operating voltage as 5V
  21. UART selection jumper:
    A: access Raspberry Pi via USB to UART
    B: control the SIM7600 by Raspberry Pi
    C: control the SIM7600 via USB to UART

Dimension

It takes 12-20 working days to arrive most European countries using standard shipping.
Some European island countries, overseas territories and South American countries need to arrive in 25-35 working days.
 
For urgent parcel, you can email us and choose Fedex, DHL, UPS, EMS etc., but you need to pay extra fee.
If you need to use the express delivery service, please contact me via eBay mail.
We absolutely stand behind our products. All of our items will be checked and tested before shipment to ensure 100% performance.
 
We also offer 15 day money back guarantee if you are unsatisfied for any reason whatsoever. We will refund the entire cost of the item not including the shipping and insurance charges. Our aim is 100% customer satisfaction!
 
If you are unclear about product usage, please feel free to contact us. We will offer your detailed instructions for use.
PushAuction