Description:

Processing Material: Acrylic, Plastic, PVC, Plexiglass

This Luxury Manual Acrylic Letter Making Bending Machine Tool, A+U Type is ideal for LED

Acrylic Lighting Channel Letters, acrylic sign letters making. It is suitable for heating acrylic

within 1.5mm-4mm (0.06" x 0.16") thickness.

• Adopting PTC heating elements; 

• Aluminum alloy thermal conductive plate is heating even; 

• Adopts high quality heat-resistant engineering plastics, non-stick the acrylic sheet;

• Easy to operate and durable.

• PTC heating elements have features of safe and energy-saving, fast heat up, durable, automatic temperature control.

• Aluminum alloy thermal conductive plate can automatic adjust the angle between heating plate and acrylic.

• Making angle bending straight.  

• Make your curved angles in beautiful arc.

• Easy operation, time-saving.

• Warranty: 2 years.

Voltage: AC 100-240V
Constant Power: Arc bending 60W±10%, Angle bending 39W±10%
Heating Temperature: 200°C±5%
Bending Letter Hight: 0 - 100mm (3.9")
Bending Thickness: 1.5mm - 4mm
Arc bending soft time (2.5mm thickness, 20℃): About 9 seconds
Angle bending soft time (2.5mm thickness, 20℃): About 3 seconds
Arc Heater Size: 100mm x 50mm x 2mm (3.9" x 2" x 0.08")

DETAILS

360 Degree Rotate End: 

Many tools are used frequently, its power cable is easy to get kink and break up. But our CS-HD-BC06 acrylic bending machine tool can avoid this situation because of the 360 degree rotate design of the power cable and heating plate joint.

 

Remarks: 
• You’d better use the bender with proper strength; otherwise it will cause heat loss and heat uneven.
• If the arc length is greater than heating plate breadth, you can use the arc bender to heat 1-3 times continuously and arrange in a row. The arc length be bent is within 150mm. 
• With short preheat time; restart the bender won t waste too much time. If you do not use it more than 5 minutes, please shut off the power switch to save electricity. 
• Please do not put the heating plate onto the power cable.
• Kindly remind you that heating transparent acrylic could leave tiny marks on the material, which is not clear on the acrylic of other colors. Please notice it when you place an order. 
• 1pc Teflon Adhesive Tape will be gift for you when you buy A type angle bending tools.

How to use the High Temperature PTFE Teflon Adhesive Tape?
Place cut the adhesive tape into 3mm width, and then stick them on both sides of angle bender respectively. The Teflon adhesive tape can be used many times.
You can use the Teflon Adhesive Tape when you want heat pvc board.

Connect the power cable, after about 60 seconds heating time, you can use the bender. 

Using the angle or arc bender vertically clamp the acrylic plate, soften the acrylic plate several seconds, and then remove the bender, make angle and arc you want, fix it with glue.

Sharp Corner Bending Machine Tool (Acrylic Angle Bending Machine Tool)

Round Corner Bending Machine Tool (Acrylic Arc Bending Machine Tool)

Processing Material: Acrylic, Plastic, PVC, Plexiglass
This type acrylic bender is ideal for LED Acrylic Lighting Channel Letters, acrylic sign letters making.

Pack includes:

Luxury Manual Acrylic Letter Making Tool, U Type Rounded Angle Bender

Luxury Manual Acrylic Letter Making Tool, A Type Right Angle Bender

1pc Teflon Adhesive Tape