Inkbird Digital Temperature Controller Thermostats ITC-308WIFI + Humidity Controller Humidistats IHC-200WIFI
ITC-308WiFi : (EU Plug)
Bullet Point：
- WIFI & APP :WIFI smart controller supports both IOS & Android，WIFI supports 2.4GHz Wi-Fi router;
- Free APP “InkbirdSmart” which is able to monitor temperature at any time;
- Dual Relay Output : Dual relay output, which can connect heating and cooling device at the same time;
- Alarm for Safe : High/Low temperature limit setting alarm;
- Convenient Design :Plug-n-play, easy to use.
- Support ℃/℉reading and Temperature calibration;
-Long Warranty :2 years warranty
Feature：
- Plug and play design, easy to use.
- Support reading with Centigrade or Fahrenheit.
- Maximum output load:2200W(220V)
- Temperature calibration, Compressor delay protection for refrigeration control.
- High and low temperature alarms are available.
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time.
- Dual display window, be able to display measured temperature and set temperature at the same time.
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Power: Voltage: 100~230Vac，50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac), 2200W(220Vac)
- Type of temperature probe: R25℃=100KΩ±1%, R0℃=26.74~27.83KΩ,B25/85℃=3435K±1%
- Temperature measurement range:-40℃~100℃/-40℉~212℉
- Temperature display accuracy: 0.1℃ /℉(<100℃/℉), 1℃/℉(>=100℃/℉)
- Display unit: Celsius ℃ or Fahrenheit ℉
- Ambient temperature: -20℃~60℃/-4℉~140℉- Storage environment: temperature:0℃~60℃/32℉~140℉;
- Humidity: 20~80%RH(Unfrozen or condensation )
- Warranty:Controller:2 years warranty
IHC-200WiFi :(EU Plug)
Description:
Dual Relay Output:
Support both humidifying equipment and dehumidifying equipment.
Humidity measurement range:
10 ~ 99% RH. Relative humidity accuracy: ± 3% RH ~ ± 5% RH.
Plug-n-Play:
No complicated installation required.
Dual display Windows:
Display the set humidity value and the measured humidity value at the same time with 2 screens.
Humidity calibration :
Support humidity calibration and dehumidification control delay protection.
Remote Control:
Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, monitor or adjust the humidity on your phone through the app at any time anywhere.
High/Low Humidity Alarm:
Set a High/Low Humidity Alarm,alarms and reminds you if the humidity value exceeds the setting value,alarms when a probe error occurs.
Alarm stop:
Press any button to turn off the alarm sound or you can turn it off on your phone
Specification
- Voltage: 100-230Vac 50/60Hz ; Current: 10A
- Maximum Power: 1200W(120Vac), 2200W(220Vac)
- Humidity Measurement Range: 10~99%RH
- Humidity Display Accuracy: 0.1%RH
- Relative Humidity Accuracy(10% to 95%RH): Typ: ±3%RH, Max: ±5%RH
- Display Unit: %RH
- Operating Ambient Temperature: -20℃~40℃/-4℉~104℉
- Storage Temperature: 0℃~60℃/32℉~140℉
- Storage Humidity: 20~80%RH(not frozen or dewed)
- Waterproof Grade: not waterproof
- Wireless Connection: Wi-Fi Connection.
- Warranty: 2 years
Notes:
- Do not put probes or metal wire into fire.
- Do not put probes into water, it may lead to inaccurate measurements.
- Only support 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n).
Working Rules:
Connect with humidifier and dehumidifier, Work 1 socket for humidifier, Work 2 socket for dehumidifier.
The humidity range you want to control is: 60~70%Rh,then you can set HS=65%RH, HD=5,DD=5.
When Ambient humidity is higher than 70%RH(HS+DD), it will turn on the dehumidifier, turn off at 65%Rh.
When Ambient humidity is lower than 60%RH(HS-DD), it will turn on the humidifier, turn off at 65%Rh.
Package Contents：
1 x ITC-308Wi-Fi Temperature Controller(EU Plug)
1 x IHC-200Wi-Fi Humidity Controller(EU Plug)
1 x IHC-200Wi-Fi User’s Manual
1 x ITC-308Wi-Fi User’s Manual
1 x Warranty Card
