Soft Starter Start Class A Power Amplifier lightning Temperature Protection 100A
Item Detail:
Type: RGL relay
Power Input: AC 90V to 150V / AC 150V to 280V ( will ship accroding to your local voltage)
Size: 95mm(W) x 58mm(D) x 30mm(H)
contact inside: copper
power capacity : approx. 2000W
Lightning protection: Yes
 
 
Application:
Suitable for premium audio devices or other large start-up current equipments, The power capacity 
of load should not exceed 3800W, For long time working device the recommended power capacity is approx. 2000W 
 
 
 
Feature:
*100% New and High quality
*Fully assembled,Buy with confidence
*High quality RGL relay support up to 100A high power go through, Large copper contact inside.
*The purpose of the soft start board is to reduce the impulse current shock during startup,Reduce the impact 
  on the power grid and to extend the life of the switch. 
*The board is equipped with a gas discharge tube for lightning protection function. The gas discharge tube is composed of 
  a pair of cold cathode plates which are separated from each other and enclosed in a ceramic tube filled with a certain inert gas (Ar). 
*The gas discharge tube is turned off under normal operating conditions, and its interelectrode resistance is above the megaohm level.
  When the surge voltage exceeds the withstand voltage of the circuit system, the gas discharge tube was breakdown and the arc 
  discharge phenomenon occurs. Because the arc voltage is low, it is only several tens of volts, which can limit the further rise of
   the surge voltage in a short time.  
*The gas discharge tube uses the above principle to limit the surge voltage, and discharges the lightning transient overcurrent 
  and limits the overvoltage to the circuit. 
*This board uses ultra-high current (100A) pure copper lead relays and large thermistor NTC 20D-20, the effective protection of the machine,
  to prevent excessive power-on current. 
*The board does not need auxiliary power supply, only two terminals, one is power supply input, the other is load output, very easy to use.
 
 
 
 
Wiring order:
Power input - Power switch - Soft start input - Soft start output -- Load
 
 
 
 
Working flow:
When the power is turned on, power is supplied to the load through a negative temperature coefficient thermistor, as the thermistor
temperature increases, the resistance drops, the voltage rises slowly, thus effectively inhibiting the inrush current impact on the line
and other electrical appliances. About 2 seconds after the relay ttracts gathers (Adjustable suction time, see the picture for details), 
short circuit thermistor, the power supply through the relay contacts directly to the load, the load into the normal working condition.
 
 
 
 
Package including:
1Pc x 100A Soft Starter Start Class A Power Amplifier lightning Temperature Protection(As shown)
 
 
Tips:
Please allow 0.1- 0.5cm error due to manual measurement. Please make sure you do not mind before you buy.
The colors may have different as the difference display, please understand.
Please check which Length and the Quantity you need.

EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

  • If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
    We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

DataCaciques