Note : WS2812B strip must connect DC 5V Pixel Controller and DC5V Power Supply, otherwise it will burn out .

WS2812B LED strips Item Detail:

Input voltage : DC5V

Power : 1 leds chip = 0.3Watt !!!

30leds =9W, 60leds=18W,

144 leds=43.2 Watt,

150 leds= 45 Watt

300 leds = 90 Watt .

LED resource : WS2812B led(5050 SMD RGB LED with built-in WS2812B IC chip)

LED: Each LED is separately controlled , it is cutable .

IC Type: Improved version ws2812 IC(built inside the 5050 smd rgb led) of IC: (1 IC drives 1 led chip);

Pixels: 30 leds/60leds/144leds per meter;

Pitch : 16.6mm(1000/64);

Grey scale : 256;

Bits/color: 8-bits/color;

FPC size : Width: 10mm, High: 2.5mm;

FPC color : BLACK / White

Colors: Full color RGB, dream color changing;

Cuttable: Every LED is cuttable;

Lighting angle: 120degree

Life time: 50,000hours

Working mode: External pixel controller and power supply

Connection: VCC : RED; GND: BLACK; DAT: BLUE

Package : In anti-static bag,with 3M adhensive tape on the back(Except the Waterproof in SiliconTube)

IP20 = Non- waterproof

IP65 = Waterproof in Silicon Coating

IP67 = Waterproof in SiliconTube

Cable length: 1M/3.28FT or 5M/16.4FT

Package List :

1 X WS2812B Pixels Strip

SP107E Bluetooth Music controller

Features:

1. Long distance APP remote control via Bluetooth.

2. Support almost ever kind of one-wire or two-wires LED driver IC

3. Support setting pixel number and segment number, support up to 960 pixels.

4. With 18 kinds of LED strip music effects, 30 kinds of LED matrix music effects and 180 kinds of non-music effects.

5. DC5V~24V wide range working voltage, with protection of power polarities reversed connection.

6. User setting saving.

Specifications:

Working temperature: -20℃ ~ 60℃

Working Voltage: DC5V ~ 24V

Working Current: 18mA ~ 45mA.

Remote Distance: 20 meters

Product size: 85mm * 45mm * 22mm

Certificates: CE, RoHS

Package included:

1 * Controller

1 * JST 3Pins Male

1 * DC cable

1 * Aux cable

1 * Screw driver

1 * Manual

SP108E 2812 Wifi Controller Operating Instructions

1. Features:

1. Long distance APP remote control via WIFI;

2. Support routing mode(AP) and LAN connection mode(STA);

3. Support almost every kind of one-wire or two-wire LED driver IC ;

4. Brightness adjustable, With 180 kinds of patterns and 8 kind of color adjustable patterns;

5.Creatively usingfrom-image-to-effect method for user toDIYany effect;

6. Support setting pixel number and segments number, able to control up to 2048pixels;

5. DC5V~24V widerangeworking voltage, preventing reverse connection of power supply;

6. User setting saving;

2. App control:

 Both IOS version and Android OS version are available. (hardware should supportWIFI)

•RequiresIOS version 10.0 or later;

•Requires AndroidOSversion 4.4or later;

•Search”LedShop”in App Store or Google pay or scan this QR code to download and install the App:

3. Specifications:

Working temperature : -20℃~60℃;

Working Voltage : DC5V~24V;

Working Current :20mA~130mA;

Remote distance :30 Meters;

Product size : 85mm*45mm*22mm;

Product weight : 40g ;

Certificates : CE, RoHS;

4. Working Mode and Connecting:

•AP(Access Point) mode:Controller and Phone connect directly, controller works as an access point.

Connect steps: 1.When the device is not connected to any WIFI network, power on the controller and wait for 20s

and then controller will switch intoAP mode ;

2.In the WIFI setting page,find and connect the controller(named likeSP108E_xxx, the default pin code is 12345678),

3.Open the LED Shop App ,then the controller will be showed on the device list;

•STA(Station) mode:Controller and phone are in one same WIFI network, in this network, users can operate the controller smoothly.

Connect steps: 1.When the device is not connected to any WIFI network,power on the controller,

controller will be remain inWait-For-Connet mode for 20 seconds;

2. Make sure that your phone is connected to a WIFI network, Open LED Shop APP, pressing the Add Device button,

input the WIFI pin code, then press theOKto confirm and wait for the configure processing finish;

3. When controller successfully enter the WIFI network, it will be showed on the device list;

4. User can select the controller and remove it out of the network by pressing theRemove Device button,

then the controller will switch into AP mode.

Package includes:

1x SP108E Bluetooth LED controller

1x 3pin female JST connector

1x Mini screwdriver

1x User manual

(Note: power supply/mobile/controller/led strip not included!)

Power supply Features:

1)Smart device surge protection for over voltage, short circuit protection.

2)Strong built for heavy duty and long usage performance.

3)Widely used in Industrial automation, LED display, communications, etc

4)Safety Compliance: UL/SA/CCC/ FCC / CE.

5)PLUG: AU Plug

6)Working Temperature: 0~40℃

7)Storage Temperature: -20~60℃

Technical Specifications:

1)Type: Power Supply Adapter

2)Input Voltage: AC100~240V 50/60Hz

3)Output Voltage: DC 5V

4)Output Current:  5A 

5)Cable Length: About 120CM / 47.24inch

6)Power Cord Length: About 120CM (Included Plug)

7)Out put Adaptor : 5.5mm x 2.1mm

8)Warranty : 1 Year

9)Efficiency:>=80%

100% satisfaction guarantee and we are 100% confident on our products!

Package included:

1 X 5V Power Supply( as your choice)

1 X AU Power Cord