-
High quality base metal shield fobs with assorted animal-themed designs. These fobs are styled after traditional, vintage watch fobs, and are accented with well done colored enamel work (where featured).
-
We are happy to be able to offer the following individual decorative fob designs, selectable from the dropdown choices above:
- buffalo (smfob224): Heavy pewter-toned (dark silver) base metal fob, heavy oval shield with geometric designs supports a raised buffalo head with deeply engraved fur and face, sturdy top connector ring, measures approx 32mm wide x 43mm tall. Due to the larger size of this fob, we suggest it be paired with our heavy or extra-heavy weight chains.
- butterfly (smfob458): Fancy round pewter-toned (dark silver) base metal and enamel fob, outer ring has been engraved with leaf designs and a lower circle accented with blue enamel, the ring supports a cut-out scene of a butterfly perched on the bottom part of the ring that has been accented along the wings with blue and purple enamel, sturdy top connector loop, measures approx. 22mm in diameter x 30mm tall.
- elk (smfob225): Handsome pewter-toned (dark silver) base metal fob, heavy oval shield with a detailed woodland mountain scene supports a raised standing elk with deeply engraved fur, horns and face, sturdy top connector ring, measures approx. 31mm wide x 40mm tall. Due to the larger size of this fob, we suggest it be paired with our heavy or extra-heavy weight chains.
- lizard (smfob447): Attractive silver-plated base metal fob in the shape of a sinuous lizard with outstretched legs has been deeply engraved with round designs along the length and is accented with black around each circle, small connector loop, measures approx. 19mm wide x 42mm long. Due to the larger size of this fob, we suggest it be paired with our heavy or extra-heavy weight chains.
- panther (smfob094): Fancy silver-plated sleek panther-shaped fob with black enamel, silver accents on body and face, measures approx. 22mm wide x 13mm tall (bail not included).
- tiger (smfob091): Fancy silver-plated fob, detailed roaring tiger's head is detailed with orange, black, white and red enamel, measures approx. 16mm wide x 14mm tall (bail not included). Due to the smaller size of this fob, we suggest pairing it with our light and medium weight chains.
- turtle (smfob444): Elegant carved lustrous black Hematite stone has been carved and polished in a turtle shape and engraved with a shell pattern on the back and a line design on the stomach, small gold-plated base metal connector loop, measures approx. 22mm wide x 8mm thick x 31mm tall.
- Photo notes: click on the photos for enlarged images. Our main image above that displays all fobs for this group features individual photos with a matched scale, to show the relative sizes of the fobs. Any rulers shown for scale give measurements in centimeters (with millimeter gradients), NOT inches. Please note that very dark or light spots that are not mentioned in the description above are likely a result of the camera and lighting. We apologize for any inconvenience this may cause!
We are happy to offer these items in a variety of finishing options, selectable from the dropdown choices above. Our keychains are assembled in the USA, at the PM Time Service office in Denver, Colorado, to your chosen specifications, ensuring you will receive a high quality accessory you will not find anywhere else.
Click the below photos for enlargements. Keychain example photos are shown without fobs attached. Please note that very dark or light spots that are not mentioned in the following descriptions are likely a result of the camera and lighting. We apologize for any inconvenience this may cause!
- Fob only: For attachment to a pocket watch chain, necklace, lanyard, zipper-pull, or other accessory; or for use by itself.
-
With figure-8 style key ring: Fob is attached to a sturdy base metal figure-8 key ring with solid base metal bail. The key chain segment measure approximately 48mm (2") in length. To add a key to the chain, pry open the top section of the key chain and slip your key between the 2 separated sections until it rests to the side. Then, release the key chain, which will snap back to the closed position.
-
With latch style key ring: Fob is attached to a sturdy base metal latch-style key ring with short base metal length of thick rope-style chain connecting the ring to the fob. The key chain segment measures 26mm wide x 65mm long. To use the key chain, open the clasp on the side of the latch-ring, attach your keys to the ring and then close and latch the clasp back together.
-
With split-ring style key ring: Fob is attached to a sturdy base metal split-ring key ring with a small base metal swivel connecting the ring to the fob. The key chain segment measures 33mm wide x 48mm long.
-
With carabiner style key ring: Fob is attached to a sturdy smooth polish base metal carabiner-style key ring, featuring a large tapered-rectangular body with a rounded end and spring loaded latch that closes to secure keys within the ring, heavy loop at the bottom of the body supports a swivel connector. The key chain segment measures approx. 38mm long x 24mm wide.
Click the following photos for enlargements. Any rulers shown for scale give measurements in centimeters (with millimeter gradients), NOT inches. Background graphs shown for scale feature 2mm by 2mm squares, with the darker lines being 10mm apart. Please note that very dark or light spots that are not mentioned in the following descriptions are likely a result of the camera and lighting. We apologize for any inconvenience this may cause!
Other Available Finishing Options:
Our animal-themed fobs are also available with finishing options other than the keychains featured on this listing; please click on the links below to view these listings on eBay:
Additionally, for our small fobs, we also offer chain necklace and lapel pin finishing options (upon request) in multiple colors that allow the fobs to be used as pendants.