-
High quality stone fobs with assorted hexagonal obelisk designs. These fobs are styled after traditional, vintage watch fobs.
-
We are happy to be able to offer the following individual decorative fob designs, selectable from the dropdown choices above:
- aventurine (smfob471): Elegant mint green aventurine stone fob with faint mottled patterns of white and grey has been cut and polished in the shape of a hexagonal (6-sided) obelisk with a tapering point on the bottom and a small silver-plated connector loop on the top, due to the nature of the natural stone, each fob will have slightly different mottling patterns, measures approx. 7mm wide x 24mm long.
- black onyx (smfob468): Elegant black onyx stone fob with white, grey and brown inclusions has been cut and polished in the shape of a hexagonal (6-sided) obelisk with a tapering point on the bottom and a small silver-plated connector loop on the top, due to the nature of the natural stone, each fob will have slightly different inclusion patterns, measures approx. 7mm wide x 24mm long.
- carnelian (smfob469): Elegant deep red semi-opaque carnelian stone fob with golden, tan and brown inclusions has been cut and polished in the shape of a hexagonal (6-sided) obelisk with a tapering point on the bottom and a small silver-plated connector loop on the top, due to the nature of the natural stone, each fob will have slightly different inclusion patterns, measures approx. 7mm wide x 24mm long.
- snowflake obsidian (smfob470): Elegant black snowflake obsidian stone fob with grey spot-like inclusions has been cut and polished in the shape of a hexagonal (6-sided) obelisk with a tapering point on the bottom and a small silver-plated connector loop on the top, due to the nature of the natural stone, each fob will have slightly different inclusion patterns, measures approx. 7mm wide x 24mm long.
- sodalite (smfob473): Elegant dark blue sodalite stone fob with black, white, grey and tan inclusions has been cut and polished in the shape of a hexagonal (6-sided) obelisk with a tapering point on the bottom and a small silver-plated connector loop on the top, due to the nature of the natural stone, each fob will have slightly different inclusion patterns, measures approx. 7mm wide x 24mm long.
- tigereye (smfob472): Elegant brown tigereye stone fob with refractive lighter brown and tan inclusions has been cut and polished in the shape of a hexagonal (6-sided) obelisk with a tapering point on the bottom and a small silver-plated connector loop on the top, due to the nature of the natural stone, each fob will have slightly different inclusion patterns, measures approx. 7mm wide x 24mm long.
- Photo notes: click on the photos for enlarged images. Our main image above that displays all fobs for this group features individual photos with a matched scale, to show the relative sizes of the fobs. Any rulers shown for scale give measurements in centimeters (with millimeter gradients), NOT inches. Please note that very dark or light spots that are not mentioned in the description above are likely a result of the camera and lighting. We apologize for any inconvenience this may cause!
We are happy to offer these items in a variety of finishing options, selectable from the dropdown choices above. Our keychains are assembled in the USA, at the PM Time Service office in Denver, Colorado, to your chosen specifications, ensuring you will receive a high quality accessory you will not find anywhere else.
Click the below photos for enlargements. Keychain example photos are shown without fobs attached. Please note that very dark or light spots that are not mentioned in the following descriptions are likely a result of the camera and lighting. We apologize for any inconvenience this may cause!
- Fob only: For attachment to a pocket watch chain, necklace, lanyard, zipper-pull, or other accessory; or for use by itself.
-
With figure-8 style key ring: Fob is attached to a sturdy base metal figure-8 key ring with solid base metal bail. The key chain segment measure approximately 48mm (2") in length. To add a key to the chain, pry open the top section of the key chain and slip your key between the 2 separated sections until it rests to the side. Then, release the key chain, which will snap back to the closed position.
-
With latch style key ring: Fob is attached to a sturdy base metal latch-style key ring with short base metal length of thick rope-style chain connecting the ring to the fob. The key chain segment measures 26mm wide x 65mm long. To use the key chain, open the clasp on the side of the latch-ring, attach your keys to the ring and then close and latch the clasp back together.
-
With split-ring style key ring: Fob is attached to a sturdy base metal split-ring key ring with a small base metal swivel connecting the ring to the fob. The key chain segment measures 33mm wide x 48mm long.
-
With carabiner style key ring: Fob is attached to a sturdy smooth polish base metal carabiner-style key ring, featuring a large tapered-rectangular body with a rounded end and spring loaded latch that closes to secure keys within the ring, heavy loop at the bottom of the body supports a swivel connector. The key chain segment measures approx. 38mm long x 24mm wide.
Click the following photos for enlargements. Any rulers shown for scale give measurements in centimeters (with millimeter gradients), NOT inches. Background graphs shown for scale feature 2mm by 2mm squares, with the darker lines being 10mm apart. Please note that very dark or light spots that are not mentioned in the following descriptions are likely a result of the camera and lighting. We apologize for any inconvenience this may cause!
Other Available Finishing Options:
Our obelisk-themed fobs are also available with finishing options other than the keychains featured on this listing; please click on the links below to view these listings on eBay:
