High quality base metal shield fobs with various Seaboard railroad & railway designs. These fobs are styled after traditional, vintage watch fobs, and are accented with well done colored enamel work (where featured).
We are happy to be able to offer the following individual decorative fob designs, selectable from the dropdown choices above:
Atlantic Coast Line (lgfob191): A round silver-plated shield with white enamel background with dark blue enamel border, "Atlantic Coast Line" in fancy blue enamel script with silver outlin, measures approx. 38mm in diameter (bail not included).
Clinchfield Railroad (lgfob161): A fancy gold-plated shield, round shield with white and tan enamel background and black enamel border has "Clinchfield Railroad" in gold text around circumference, locomotive-themed banner through center of circle is detailed in tan and white enamel and has "Quick Service - Short Route Between the Central West & Southeast" in gold text, measures approx. 41mm wide x 25mm tall (bail not included).
CSX Transportation (lgfob198): A rectangular silver-plated shield with grey enamel background, large "CSX" in blue enamel on upper half, "transportation" in blue enamel on lower half, measures approx. 41mm wide x 27mm tall (bail not included).
Louisville & Nashville (lgfob210): A rectangular silver-plated shield with bright red enamel background with silver outline, elaborate L & N logo in white enamel with silver designs above "Louisville & Nashville R.R." in silver text, measures approx. 38mm wide x 27mm tall (bail not included).
Monon Railroad (lgfob208): A round silver-plated shield with light grey enamel background and red enamel border ring and center line, top half has the Monon Railroad logo in red enamel with silver outline, bottom half has "Monon" in red enamel text with silver outline above "The Hoosier Line" in silver text, measures approx. 38mm in diameter (bail not included).
Seaboard Railroad Air Line (lgfob100): A silver-plated shield, black enamel around circumference with Seaboard Railroad Air Line in silver text, silver inner track with red enamel heart, Through the Heart of the South in silver text, measures approx. 38mm in diameter (bail not included).
Photo notes: click on the photos for enlarged images. Our main image above that displays all fobs for this group features individual photos with a matched scale, to show the relative sizes of the fobs. Any rulers shown for scale give measurements in centimeters (with millimeter gradients), NOT inches. Please note that very dark or light spots that are not mentioned in the description above are likely a result of the camera and lighting. We apologize for any inconvenience this may cause!
We are happy to offer these items in a variety of finishing options, selectable from the dropdown choices above. Our keychains are assembled in the USA, at the PM Time Service office in Denver, Colorado, to your chosen specifications, ensuring you will receive a high quality accessory you will not find anywhere else.
Click the below photos for enlargements. Keychain example photos are shown without fobs attached. Please note that very dark or light spots that are not mentioned in the following descriptions are likely a result of the camera and lighting. We apologize for any inconvenience this may cause!
Fob only: For attachment to a pocket watch chain, necklace, lanyard, zipper-pull, or other accessory; or for use by itself.
With adapter: Fob is finished with a matching color silver or gold-toned solid base metal bail, or a black adapter on fobs with a copper-toned base. A small hole at the top of the bail will allow the fob to be secured to your own keychain, lanyard, zipper-pull, or other accessory with the included jump ring (jeweler’s pliers suggested for assembly). A non-matching color adapter can be attached instead at no charge on request.
With figure-8 style key ring: Fob is attached to a sturdy base metal figure-8 key ring with solid base metal bail. The key chain segment measure approximately 48mm (2") in length. To add a key to the chain, pry open the top section of the key chain and slip your key between the 2 separated sections until it rests to the side. Then, release the key chain, which will snap back to the closed position.
With latch style key ring: Fob is attached to a sturdy base metal latch-style key ring with short base metal length of thick rope-style chain connecting the ring to the fob. The key chain segment measures 26mm wide x 65mm long. To use the key chain, open the clasp on the side of the latch-ring, attach your keys to the ring and then close and latch the clasp back together.
With split-ring style key ring: Fob is attached to a sturdy base metal split-ring key ring with a small base metal swivel connecting the ring to the fob. The key chain segment measures 33mm wide x 48mm long.
With carabiner style key ring: Fob is attached to a sturdy smooth polish base metal carabiner-style key ring, featuring a large tapered-rectangular body with a rounded end and spring loaded latch that closes to secure keys within the ring, heavy loop at the bottom of the body supports a swivel connector. The key chain segment measures approx. 38mm long x 24mm wide.
Click the following photos for enlargements. Any rulers shown for scale give measurements in centimeters (with millimeter gradients), NOT inches. Background graphs shown for scale feature 2mm by 2mm squares, with the darker lines being 10mm apart. Please note that very dark or light spots that are not mentioned in the following descriptions are likely a result of the camera and lighting. We apologize for any inconvenience this may cause!
Other Available Finishing Options:
Our Seaboard-themed fobs are also available with finishing options other than the keychains featured on this listing; please click on the links below to view these listings on eBay: