Properties:
100% brand new and high quality;
Push rod Each side contains a travel limit switch. When the telescopic rod moves up or up, the power supply is automatically cut off.
The engine does not idle. Switch off the power supply, it can be stopped at any position with a self-locking function.
The push rod is driven by a DC motor with a screw drive. The telescopic rod can only be retracted without turning.
The engine is positive and negative. For example, when the positive electrode is stretched and the negative electrode is shrunk, the telescopic direction of the rod can be changed by changing it.
Ambient temperature -10 ° C to + 50 ° C.
Standard protection class: IP54.
Low noise design, noise level below 50 dB.
Please do not disassemble the machine. Product features: drive other objects to push, pull, lift and fall. Product Applications: TV Lift Tables, Massage Beds, Electric Beds, Medical Chairs, Electric Appliances, Micro Appliances, Electric Sofas, Camera Frames, Cameras, and more.
specifications:
Input voltage: DC 12V;
Stroke Length: 30mm, 50mm (Optional);
Maximum pressure load: 30N, 60N, 90N (optional);
Travel speed: 30mm / s, 15mm / s, 9.5mm / s (Optional);
Low noise: The low noise design, noise level below 50dB;
Operating frequency: 10%;
Material: aluminum alloy housing;
Degree of protection: IP54, protection against dust, water and corrosion, suitable for outdoor use. Internal limit switch, switch off automatically when it reaches in the case of motoridling.
Note:
Before use, first make sure that the motor voltage is correct. If it is a DC motor, also take into account that the supply current is sufficient;
Do not store or operate in high temperature or humidity environments and do not expose to corrosive gas as this will reduce engine efficiency;
When it is necessary to solder the positive and negative power supply on the motor;
When clamping, the soldering iron temperature is 340 ° C ± 40 ° C. Within 3 seconds after the heating-up time;
Do not deform the plastic;
When installing the motor, make sure that the screws are too long and the;
The company must not over-press the long bolts on the parts in the engine;
Delivery content:
1 × linear drive motor
2x mounting bracket