WHAT ARE HUB CENTRIC RINGS?

(Also called hubrings, hubcentric rings, centering rings)

This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.



WHY DO I NEED IT?

You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.



HOW CAN I CONFIRM FITMENT?

- Hubrings have 2 measurements, typically in millimeters (mm).

- The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 56.1mm. This should match your vehicle's hub bore.

- The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 73.1mm. This should match your wheel's centerbore.





COMPATIBILITY INFORMATION

These hubrings are compatible with vehicles with a 56.1mm Hub. Your Wheel Bore must be 73.1mm.



IMPORTANT NOTES - BUYERS ARE REQUIRED TO CHECK BEFORE PURCHASING

- Buyers must ensure their Vehicle's Hub is 56.1mm.

- Buyers must ensure their Wheel's Centerbore is 73.1mm.

- If you are not unsure about fitment or the measurements, please do not guess.
Use the "Have a Question?" section below. Be sure to include vehicle
year/make/model.



INSTALLATION ADVISORY

Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.

For Vehicles with 56.1mm Hub
AND
Wheels with 73.1mm Bore

  • StanceMagic Hub Centric Rings made of corrosion resistant polycarbonate plastic. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.

  • HUB RING INNER DIAMETER: 56.1mm (Your vehicle's hub lip diameter needs be this size)

  • HUB RING OUTER DIAMETER: 73.1mm (Your wheel's center bore needs to be this size)

  • Compatible with 1986-2001 Acura Integra. Compatible with Honda 1982-1989 Accord, 1979-2005 Civic, 1993-1997 Civic Del Sol, 1988-1991 CRX, 2006-2020 Fit, 1979-1991 Prelude. Compatible with 2000-2009 Kia Spectra. Compatible with 2002-2013 Mini Cooper. Compatible with 2013-2016 Scion FR-S FRS. Compatible with Subaru 2003-2006 Baja, 2013-2021 BRZ, 1998-2021 Forester, 1993-2021 Impreza, 1990-2021 Legacy, 2000-2021 Outback, 2008-2014 Tribeca, 2013-2021 XV. Compatible with 2017-2021 Toyota 86.

  • IMPORTANT: Before ordering, measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing. Installation is simple and requires common tools used to remove/install rims and tires. NOTE that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.
Quantity 4 pieces
Inner Diameter
(Vehicle Hub Size)		 56.1mm
Outer Diameter
(Wheel Bore Size)		 73.1mm
Material Polycarbon Plastic
Color Black

FITMENT INFORMATION

Compatible with vehicles with a 56.1mm hub that needs to center a wheel with 73.1mm centerbore.

Please see eBay's Vehicle Compatibility Table for a list of applicable vehicles

Important Notes



	
	 If you are not sure the hub size of your vehicle, please send us an eBay message and we will be glad to help

	 Please Verify the measurement of your VEHICLE BORE AND WHEEL before purchasing

	 eBay's Parts Compatibility Chart above should only be used as a guideline.

Legal Information



NOTE: This is an aftermarket component. The vehicle makes/models used in this listing are registered trademarks of their respective owners, and are used in this listing to identify compatibility.
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.