CSETEMPLATENEW
About CarStuffetcClick to Visit our Ebay StoreClick to Read our Policies & TermsClick for Contact Info
 

 

C5 Racing Style Gas / Fuel Door Cover

                                                                                Brushed (Matte) T-304 Stainless Steel 

 

 
 
 
 

Fits 1997-2004 Corvette Coupe, Convertible & Z06

 

 

Made from Stainless Steel and Machine Brushed in house for a Matte Finish!

 

In 2002 when I first bought my vette I found a really cool Fuel Door at Eckler's which was stainless steel and brushed.  It replaced the factory door completely but there wasn't a polished version that would match the polished or chrome wheels many of us have.  It had two draw backs, first it involved removing the stock fuel door and arm and then it was replaced with a new arm and seven screws.  But the main drawback was that it was priced at $349!  (Yes, that's dollars)

In 2005 the C6 came out, and Putco came out with a chrome plated plastic fuel door cover for the vette (which we carry) and to me it just didn't look quite right.   In part it was because the thickness of the plastic made it sit a bit too high for my taste.

Now for years we were selling more fuel doors on eBay than anybody with more than 1000 fuel doors in stock at any one time, and although we sold a ton of billet doors the best selling fuel doors by far were the Stainless Steel stick on fuel door covers that had the look of billet at a fraction of the price.  Installation was a no brainer and reversible, they had a low profile and from a distance were indistinguishable from a billet door.  They would never rust, and because they were stainless and not chrome plated, peeling chrome would never be an issue.   Best of all the price was less than half of a billet door. 

I often got email requests for something for the C5, and as a C5 owner it occurred to me that this would be a great way to add some "bling" to the vette with out being over the top.  I installed the first prototype on my own car which is pictured above.  As a result I get a lot of compliments on it and a couple of weeks ago a couple pulled up to me at a light and showered me with platitudes on how good the car looked!

So here you have it, the first and only affordable fuel door cover for the C5 Corvette, and it wont cost you an arm nor a leg but it will make your Corvette look like a million! 

 

A customer of ours, Mike Galena from Las Vegas requested a custom brushed version for his show car which is pictured above.  Feedback on the brushed cover has been extraordinary, especially on silver, charcoal metallic, and black Corvettes so we now offer this version as well.  The brushed version is done in house so please note we have to slice open the packaging in order to access the cover for machining.  Special thanks to Mike for providing  pictures of his car for us to use.  ;)

 

  • Made from High Quality T-304 Stainless Steel

  • Fits all C5 Corvettes 1997-2004

  • Wont Rust, wont peel and easy to clean with chrome polish

  • Covers existing Fuel Door

  • Installs in Minutes with supplied 3M automotive adhesive

  • No screws, no drilling!

 

 

 

Product Video / Installation Video:  None

 

 

Installation is best performed when the temperature is around 70 degrees or above.  If its cold outside either wait for the temperature to rise or use a heat gun or hair dryer to warm the back side of the part and the door before apply the adhesive. 

Remove the cover from the packaging and take the supplied 3M automotive foam adhesive and peel and stick between the rivets on the back side of the cover.  

Clean the surface of the fuel door with a good degreasing soap or Windex and wipe dry with a clean rag.  Do not use a dirty contaminated rag as any oils or soil can impede the adhesive from adhering.

Test fit the cover first before removing the protective adhesive covering.   This tape is wicked strong and if you lay it down on a clean surface before positioned correctly you will have a devil of a time getting it back off.  If you need to you can use a plastic spudger or putty knife to help lift the tape a piece at a time to reposition the cover.

It is best to "roll" it on from left to right, place the lip of the cover against the left edge and snug it up and then lay it over using your fingers to keep it aligned top and bottom and then push firmly to seat it and you are done!

 

 

PayPal: eBay's service to make fast, easy, and secure payments for your eBay purchases!

PayPal?eBay's service to make fast, easy, and secure payments for your eBay purchases!

 Visa Mastercard Discover American Express eCheck

 

Ships USPS Priority Mail to all 50 States and territories.

Priority International Shipping worldwide.

 

 

Lifetime warranty on Corrosion. (Repair or replace our option) 

 

 

30 Day Money back returns if returned with all packaging and in unused condition. 

 

 

Terms of Sale & Policies

By clicking "Buy it Now" or by placing a bid, you agree to be bound by the terms specified in this listing and our Policies page.  For more information please click the preceding link or the button at the top of the page. 

Item specific information is included in the listing but for details about Domestic Shipping, International Shipping, Accepted forms of Payment, or Returns please see our policy page (linked in the header).