Pro mini AT168 5V Big C Black
Pro Mini Module with ATmega168, 5V, 16MHz, Arduino compatible
The Pro Mini module is equipped with an Atmel AVR ATmega168 microcontroller. The module is fully compatible with Arduino Pro Mini.
Specification:
Microcontroller: ATmega168
Operating Voltage: 5 V
Input Voltage: 5 - 12 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
Flash Memory: 16 KB (of which 2 KB used by bootloader)
SRAM 1 KB
EEPROM: 512 bytes
Clock Speed: 16 MHz
Pro mini AT168 3.3V Big C Blue
Product Description Atmega168 Module
Condition: new
14 digital input/output port RX, TX, D2 ~ D13
8 analog input port A0 ~ A7
1 to TTL level port RX/TX
6 PWM port, D3, D5, D6, D9, D10, D11
Using Atmel Atmega328P - AU microcontroller
Support serial download
Support external 3.3 V ~ 12 V dc power supply
Support 9v battery power supply
Clock frequency 8 MHZ
Size: 33.3 * 18 mm
Color: as pictures
Attention: PLS NOTE that due to lighting effects, monitor's brightness / contrast settings etc, there could be some slight differences in the color tone of the pictures and the actual item!
Pro mini AT168 5V Big C Blue
100% brand new and high quality
14 Digital input/output ports RX, TX D13, D2 ~~ of,
or 8 analog input port A0 to A7
The TTL level serial transceiver port RX/TX
6 PWM ports, D3, D5 , D6, D9, D10, D11
Using Atmel Atmega168P microcontroller
supports serial download
Support for external 5v~ 12V DC power supply
Support 9V battery-powered
clock frequency 16MHz
Dimensions:33.3 x 18.0 (mm)
Pro mini AT328 5V Big C Blue
Condition: New
20 Digital input / output ports:TX, RX, D2 ~ D13, A0~A5
8 analog inputs ports:A0 ~ A7
1 pairs of TTL level serial transceiver ports RX / TX
6 PWM ports: D3, D5, D6, D9, D10, D11
Main ChipAtmel Atmega328P-AU
Support Serial Download
Support external power supply 3.8-12V DC
Support 12V or less than 12V battery power supply
16MHz clock frequency
Size: 33.8mm x 18mm
Color and more details are shown as pictures
PLS NOTE that due to lighting effects, monitor's brightness/ contrass settings ect,
there could be some slight differences in the color tone of the pictures and the actual item!
Package Included:
1 x ARDUINO PRO MINI
3 x Free pin
Pro mini AT328 5V Big C Black
Specification:
- Arduino-compatible Board. New.
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- USB connection off board
- Supports auto-reset
- Max 150mA output
- Over current protected
- Reverse polarity protected
- DC input 5V up to 12V
- On board Power and Status LEDs
- Size：（Long）33mm *（wide1）18 mm *（high）6mm
Pro mini AT328 5V
Condition: New
20 Digital input / output ports:TX, RX, D2 ~ D13, A0~A5
8 analog inputs ports:A0 ~ A7
1 pairs of TTL level serial transceiver ports RX / TX
6 PWM ports: D3, D5, D6, D9, D10, D11
Main ChipAtmel Atmega328P-AU
Support Serial Download
Support external power supply 3.8-12V DC
Support 12V or less than 12V battery power supply
16MHz clock frequency
Size: 33.8mm x 18mm
Color and more details are shown as pictures
PLS NOTE that due to lighting effects, monitor's brightness/ contrass settings ect,
there could be some slight differences in the color tone of the pictures and the actual item!
Package Included :
1 x ARDUINO PRO MINI
3x Free pin
Pro mini AT328 3.3V 8MHz
Condition: new
14 digital input/output port RX, TX, D2 ~ D13
8 analog input port A0 ~ A7
1 to TTL level port RX/TX
6 PWM port, D3, D5, D6, D9, D10, D11
Using Atmel Atmega328P - AU microcontroller
Support serial download
Support external 3.3 V ~ 12 V dc power supply
Support 9v battery power supply
Clock frequency 8MHZ
Size: 33.3 * 18 mm
Color: as pictures
Attention: PLS NOTE that due to lighting effects, monitor's brightness / contrast settings etc, there could be some slight differences in the color tone of the pictures and the actual item!
Pro mini AT328 5V Double Row
Description
- Arduino-compatible Board. New.
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- USB connection off board
- Supports auto-reset
- Max 150mA output
- Over current protected
- Reverse polarity protected
- DC input 5V up to 12V
- On board Power and Status LEDs
- Size：（Long）33mm *（wide1）18 mm *（high）6mm
Package Content
A: 1PCS Arduino pro min atmega328p board
B: 3PCS Gilded Pin
MINI USB 2.0
100% Brand New.
USB 2.0 Male A to Mini B 5-pin cable.
Allows you to transfer images and data between your cell phone, MP3，PDA, GPS systems to computer.
Up to 480 Mbps data transfer rate.
Hot-swappable cable.
Plug and Play.
Cable Length: 30cm
Color: Blue
Package included:1x 30cm USB 2.0 A Male to Mini USB Cable
NANO AT168 CH340G DIY
Description:
NEW version - Nano V3 constructed on the ATmega168 Mini controller (16MHz) has the small size and can be used together with model boards for solderless wiring (breadboard). It has similar structure with Arduino Diecimila/Duemilanove, but different size. To reduce the size, components are mounted on both sides of the PCB.
The board uses a chip CH340G as converter UART-USB. Chip CH340G - is a budget solution. With an operation frequency in 12Mhz, yields stable result of a data interchange (for correct installation of drivers on the computer follow the instruction).
Nano V3, can be powered via Mini USB-port (up to 500mA). External power supply 6-12V unregulated to output VIN, or 5V external power source to a regulate output of 5V. The power supply is automatically selected with the maximum voltage value.
* This Nano ATmega168 have PinOut for V3, not V2.
Technical details:
Nano V3 form-factor,
ATmega168 (16Mhz) Mini controller,
CH340G - USB-UART interface,
Input voltage 6-12V,
Output voltage 5V/800mA, 3.3V/180mA (Only in NEW vesrion),
Mini USB - connection socket,
500mA resetable Fuse on USB port
Package Included:
1PCS Nano V3.0 ATmega168 CH340G mini USB compatibile Arduino NANO
NANO AT328 CH340G DIY
H340G Replace FT232RL
Operating Voltage（logic level）：5V
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10, D11
1 pairs of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is bootloader installed in it
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Package Included:
1 x USB Nano V3.0 ATmega328 16M 5V Micro-controller CH340G board For Arduino
NANO 328p-mu CH340G QFN
Product Summary:
Using Atmel Atmega328P-MU
CH340G Replace FT232RL
Operating Voltage（logic level）：5V
Chip:QFN
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10, D11
1 pairs of TTL level serial transceiver ports RX / TX
There is bootloader installed in it
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Support ISP download
CH340G Driver Download link : https://www.wch-ic.com/download/list.asp?id=126 OR http://www.5v.ru/ch340g.htm
IDE of arduino Download link : http://arduino.cc/en/Main/Software
NANO CH340G Micro USB
Description:
CH340G Replace FT232RL
Operating Voltage（logic level）：5V
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10, D11
1 pairs of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is bootloader installed in it
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Support ISP download
CH340G Driver Download link : http://www.wch-ic.com/download/list.asp?id=126 OR http://www.5v.ru/ch340g.htm
IDE of arduino Download link : http://arduino.cc/en/Main/Software
NANO CH340G Welded
Feature:
CH340G Replace FT232RL
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10, D11
1 pairs of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is bootloader installed in it
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Support ISP download
Driver download here or download from here
Package Included:
1x Nano V3.0 with ATMEGA328P CH340G Module
1 x Usb cable
NANO CH340G Welded+C
Feature:
CH340G Replace FT232RL
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10, D11
1 pairs of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is bootloader installed in it
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Support ISP download
Driver download here or download from here
Package Included:
1x Nano V3.0 with ATMEGA328P CH340G Module
1 x Usb cable
NANO Expand Board DIY
Description
Expansion Board Terminal Adapter DIY Kits for Arduino NANO
IO Expansion Shield For Arduino Nano is specifically designed to facilitate an easy connection between Expansion Shield For Arduino Nano and many other devices. In essence, it expands for Arduino Nano controller to link those devices in a simple and trouble free manner.
Specifications:
PCB size: 5.5×3.8cm
PCB Board color: Green
Net weight: 22g
Package included：
1 X Expansion Board Terminal Adapter DIY Kits for Arduino
NANO Expand Board Green
This is a terminal adapter for the Arduino Nano. It lables for Arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order). You can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires.
Package Include:
1 x New Terminal Adapter Board for the Arduino Nano V3.0 AVR ATMEGA328P-AU Module
NANO Expanding Board
Description
This expansion shield provides:
14 I/O Pin (servo type with GND, power and signal)
8 analog Pin with power output and GND
6 PWM Pin
1 Servo power input
5 I2C expansion Pin
AREF output
3.3V output
NANO IO Expand Board
Arduino Nano 328P IO
3pin
input 7-12V
XBee base
24L01 base
wireless sheild