PACKAGE CONTENT: ( NOT include Raspberry Pi board.)
2.23inch OLED HAT x1
RPi screws pack x1
Wiki : waveshare.com/wiki/2.23inch_OLED_HAT
This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.
Trying to add a control interface for your Pi? This compact display would be the ideal choice.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Optional interfaces: SPI (default), or I2C, configured via onboard resistor
Brings control pins for host boards like Arduino/STM32
wiki English manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Driver: SSD1305
Interface: SPI / I2C
Display size: 2.23inch diagonal
Display color: white
Resolution: 128×32
Viewing angle: >160°
Power supply voltage: 3.3V/5V
Logic level: 3.3V
SYMBOL | RASPBERRY PI PIN (BCM) | DESCRIPTION |
VCC | 3V3/5V | Power input |
GND | GND | Ground |
DIN | MOSI | SPI data input |
CLK | SCLK | SPI clock input |
CS | CE0 | Chip selection, low active |
DC | P24 | Data/Command selection (high for data, low for command) |
RST | P25 | Reset, low active |