Product   Description            

Description:

1. Product use:
It is suitable for electric car washers, electric sprayers, aquarium equipment, bonsai equipment, spray equipment, atomizers, cleaning equipment, and equipment and products that require high-pressure water sources.

2. Product features:
The use of new corrosion-resistant rubber materials and engineering plastics makes the product resistant to acids, oils, and corrosion chemicals. The motor is separated from the pump body, and the working medium (liquid) does not touch the metal parts during the whole process from water inlet to water outlet, no leakage, and no mechanical seal. It can run continuously for a long time or run under a long load. It has the characteristics of stable operation, self-priming function, small size, low noise, low power consumption and long service life.

3. Technical parameters:
Working voltage: DC12V;

Working current: 5A;

Working mode: continuous/intermittent (can be dry without water);

Speed ​​regulation mode: pressure regulation/flow regulation;

Installation method: installation in any orientation;

Maintenance method: maintenance-free;

Flow rate 7-9L/min;2 GPM

Liquid medium temperature: less than 60℃;

Motor speed: 4800 rpm;

Pump casing temperature rise: less than 40℃.

Pressure: 6-7 kg

Four: Installation guide:
There is an arrow on the pump body to indicate the direction of water outlet. When installing, it is necessary to distinguish the water inlet and outlet of the water pump. If the water inlet and outlet are connected reversely, the water pump will not work normally. The external thread of the water outlet of the water pump is M18×1.5, which can be equipped with a threaded in-line nipple (sold separately) or an 18mm nipple (sold separately) for quick connection. A filter screen must be installed at the front end of the water inlet pipe of the water pump to prevent suction of debris and ensure the safe operation of the water pump.

M18 straight-in tube nipple link: This nipple can be directly inserted out of the water pipe and then screwed to the water outlet for use.

Five: Precautions for use:
The working environment temperature of the water pump is in the range of 4-40℃. The water pump can transport water, weak salt, weak acid, weak alkali and other liquids, but not gasoline, and other flammable liquids. Although the pressure range of this product has been set when it leaves the factory, the user can adjust it again as needed.

 

Package Included:

1x Diaphragm water pump
(Excluding power cord and other accessories)