Product   Description            

Description:

Product Description:

• Circuit breaker search function Automatically adjust the sensitivity, quickly and accurately find the target circuit breaker

•Socket test function Test whether the three-pin socket is connected correctly

                        ※The ground wire is open

                        ※Reverse connection of ground wire and live wire

                        ※The neutral wire and the live wire are reversely connected

                        ※The zero line is open

                        ※correct
 
Features:
• Buzzer warning and light prompt
•Flashlight lighting function
• Low battery warning
•Working voltage AC220V/50HZ
•Safety level IEC1010-1 CATII 600V (only MS5902-T)
•Suitable for home, office, factory power grid transformation, installation and acceptance projects

 

 

Features:

•   Automatically and quickly finds correct breaker or fuse.

•  Quickly and easy identifies conditions of circuit socket.

•  MS5902-T× Works on 220V AC, MS5902-TB Works on 110V AC

•   Operating temperature: 0 ~ 50℃ 

 

Operation:  Locating a Circuit Breaker or Fuse

•   Keep the pillar at left on the MS5902-T

•    Plug the MS5902-T into the receptacle.if there is a candescent light

    fixture,please install a socket adapter before make sure the switch is

    OFF.then plug the MS5902-T into the socket adapter,turn the switch on at

    one time.(Socket adapter need purchase additional)

•   Go to the circuit breaker panel box.

•   Turn the MS5902-R on,the red LED is light.

•   Place the chapiter of the MS5902-R directly onto the circuit breaker or fuse.

•  Slide the chapiter of the MS5902-R down each breaker along both sides of 

    the panel .Then the MS5902-R will beep frequently as it denote the

    relative signal strength.

•  Move the MS5902-R down each breaker once more. On the third pass,

    the MS5902-R will beep ,the red LED will quench and the green LED will 

    light only at the circuit Breaker powering the MS5902-T. 

•   Push the breaker off and check that the LED on the MS5902-T in the outlet is

    off to confirm you have found the correct breaker or buse.

 

Test Socket   Keep the pillar at right on the MS5902-T.

 Please contradistinguish nameplate on the MS5902-T.

 

 Maintenance:   

•   Keep clean with a dry cloth.

• When the yellow LED is light on the MS5902-R, please unscrew and 

    remove cover, insert new 9V battery so as to the MS5902-R is well-balanced.