Valuable All System & All Functions Bi-directional Scan Tool fit for Mercedes Benz!

Warm Tips:

 

• 1. If you are confused about the compatibility. Brand, Model, VIN and Released Year are needed to confirm before purchase.
• 2. There are pre-installed Sprinter and Smart software in the tool normally. If not, please download or update the vehicle software via the “FoxAssist”.

 

1. What are All-systems that FOXWELL NT510 Elite fit for Mercedes Benz Star Diagnostic Can San?

There are 4 major components of a vehicle: Body, Auxiliary electrical system and electronics, Power-train and chassis and Miscellaneous auto parts

 

• Body main parts: airmatic suspension, body, doors, windows control module and so on
• Electronics includes: audio device, ignition system, lighting, sensors, electrical switches ...
• Power-train and chassis contains: braking system, engine, exhaust system, fuel supply system, suspension and steering systems, transmission system and so on.
• Miscellaneous auto parts: A/C, bearings, hose and other parts.

 

2. Will this Scan Tool fit for Mercedes Allow US to Do Our Own Maintenances？

Of course, this foxwell scanner tool fit for mercedes allows you to re-calibrate, adapt or configure certain components after making repairs or replacement, which included but not limited to Suspension Level Calibration, Crankshaft Relearn, ABS Auto Bleed, Battery Registration, Oil Light Reset, CAS reset, Height Test, CO adjustment, Transport Model Deletion and so on.

3. What Parts Have Been Improved in the Upgraded Version?

 

• Wider Coverage
• Simultaneously Show & Merge PID graphs for easy and intuitive diagnosis
• New Added Bi-directional Control functions

 

Comprehensive OE-Level All System & All Control Modules Diagnosis

NT510 Elite fit for Mercedes Benz is a professional automotive scanner for enthusiasts, independent repairs, specialized garages and technicians. Quick scan performs an automatic system test to determine which control modules are installed on the vehicle and provides diagnostic trouble codes overview.

All Control Modules of 4 major vehicle components: Body, Power-train, Chassis and Electrical System and Electronics.

Body Main Parts: Air Conditioning/ Supplemental Inflatable Restraint System(SRS/ Airbag)/ Seats / Doors / Gateway/ Windows control module/ Navigation System/ Audio Systems/ Central Locking......

Power-train: Engine system/ Exhaust system/ Fuel supply system/ Transmission system/ Four-Wheel Drive(4WD)......

Chassis: Airmatic Suspension/ Anti-lock Brake System (ABS)/ Steering Angle Sensor (SAS)/ Electronic Parking Brake (EPB)/ Steering Angle systems/ Electric Power Steering(EPS)......

Electronics Includes: Audio device/ Ignition system/ Lighting/ Sensors/ Electrical switches ......

 

• Auto VIN: Identify the vehicle information automatically and enter into diagnostic modules（Note: Some vehicles does not support auto vin functions, so you can type it in.）
• Read Codes: Scan the control modules and point out the potential car error faults which you have no idea when the warning light on the dashboard.
• Clear Codes: Guide you to figure out the car issues and clear the error codes after maintenance services.
• Live Data: Show live sensors data in text and graph and allow you to view two graphs simultaneously and merge them in one graph to compare.
• Turn Off MIL: After reapiring the car faults and clearing the car error codes, the Malfunction Indicator Lamp will turn off.

 

Do Your Own Maintenance, Reset Service Lights

It does not only include basic functions - read and erase codes, but also capable of advanced functions - actuation, activation, adaptation, initialization, learn/relearn, adjustment and coding. In addition, it allows you to access the most commonly required service features, which usually only be available from Benz dealer level scanners or much more expensive professional tools. Such as ABS bleeding, Suspension Level Calibration, Crankshaft Relearn, Transmission adaptations, Battery registration, Throttle body adjustment, as well as the followings:

ABS Auto Bleed: Bleeding the brake, cycling the pump and valves to remove the air and get a firm brake pedal.

Suspension Level Calibration: Able to go into the individual module for the suspension and test all of the different components of the system- each individual air shock, the level sensors, pump etc.

Oil Light / Service Reset: Allows you to reset the service lamps on the instrument cluster.

Airbag (SRS) / Antilock Brake System (ABS) Service: Allows you to use the scanner temporarily to activate or control anti-lock brake system, airbags or components.

Tire Pressure Monitoring System (TPMS) Service: Allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS reset after tires sensors are replaced or rotated.

Diesel-Particulate-Filter Regeneration: Allows you to perform the diesel-particulate-filter cleaning to clear the blockage through continuous burning of the particulates captured in the filter. When a regeneration cycle completed, the light automatically goes off.

Steering Angle Sensor (SAS) Calibration: Allows you to perform adjustment of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. After calibrate sensor successfully, its fault memory will be automatically cleared.

Electronic Parking Brake (EPB) Service: Allows you to perform service and maintenance, including deactivation and activation of brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on where electronic brake systems are fitted. Diagnoses EPB caliper functionality, initializes the wear indicator if new pads installed and deactivates or re-activates brake control system.

FOXWELL NT510 Elite fit for Mercedes Benz Full System Bi-directional Scan Tool/ Active Test

Foxwell nt510 fit for mercedes Bidirectional scanner allows you to use the scan tool temporarily activate or control a vehicle system or component and to check of the electronic components such as switches, sensors, relays, and actuators.

For example, if "Press Brake Pedal" displays, you have to press and hold the brake pedal and then continue. The sequence, number and type of tests are dictated by the control module.

 

• Auto Bleed Test/ Automated Bleed
• ABS Pump Motor Test
• Fuel Injector Pump/ Fuel Trim Reset
• Window/Mirror/ Door Lock/ Horn
• Cycle A/C Clutch On/Off
• Air Conditioning Test
• Wiper Test
• Interior & exterior lights Test
• Sound horn Test
• Brake Bleed Preparation Test + ABS Manual Control Tests + Fuel Composition Reset + EVAP Test + Idle Relearn + Injector Buzz Test + Pump and Value Tests + VGT Turbo Calibration......

 

Self-Monitoring Car Running Status, Pass S-M-O-G Check

How to Update Foxwell NT510 Elite OBD2 Scanner fit for Mercedes Benz?

Note: Please turn off the firewall while install the software, or it may block the process:

1. Turn on foxwelltech us, and click the “Products” part to find the NT510 Elite.

2. Enter into NT510 Elite page and Download “FoxAssist”.

3. Install “FoxAssist” in your windows laptop/desktop and register an account.

4. Activate your NT510 Elite scan tool fit for mercede.

5. Connect your NT510 Elite scanner with PC via USB cable and click update menu in your NT510 Elite and then in the FoxAssist interface.

6. Choose the car makes and wait for the downloads until the process completed.

FAQ:

Q: What if there is no Sprinter or Smart software in the NT510 Elite obd2 scanner fit for Mercedes Benz?

 

• A: There are pre-installed Sprinter and Smart software in the tool normally. If not, please download the vehicle software via the “FoxAssist”.

 

Q: What if it shows the message about “The serial number is already registered” or “The serial number does not exist?”

 

• A: If you get the message"registered", Product Serial Number is needed to solve your issue. If it shows the serial number not exist, you may click into the old address.

 

Q: Why this diagnostic scanner fit for Mercedes-benz can not clear the codes?

 

• A: It will help you to clear the error codes after you repair the car fault. If you have repair the car fault and it still can not clear them, please provide with your vehicle's brand, model, released year, VIN number and the serial number of the scanner.