PACKAGE CONTENT ：( NOT include Raspberry Pi board.)
This is the V4 version,
Please use the V4 version of the library file!
The V2 and V3 version of e-paper has been discontinued. V2's test code CANNOT be applied to V3 and V4.
2.13inch e-Paper HAT x1 （ V4 version）
RPi screws pack x1
20cm 8Pin Cable x1
Wiki English manual : www.waveshare.com/wiki/2.13inch_e-Paper_HAT
For use with your Raspberry Pi project, install the following library files: epd_2in13_V3_test.py.
The e-paper module is controlled by a library file (sample code). Please install the correct library file before using.
If you do not install it, the screen may not start.
Need to provide technical support service, please contact me.
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Wiki English manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Wiki English manual : www.waveshare.com/wiki/2.13inch_e-Paper_HAT
Specifications
Operating voltage: 3.3V/5V
Interface: SPI
Outline dimension: 65mm × 30.2mm
Display size: 23.71mm × 48.55mm
Dot pitch: 0.194 × 0.194
Resolution: 250 × 122
Display color: black, white
Grey level: 2
Partial refresh time: 0.3s
Full refresh time: 2s
Refresh power: 26.4mW(typ.)
Standby power: <0.017mW
Viewing angle: >170°
Interface
SYMBOL | DESCRIPTION |
VCC | 3.3V/5V |
GND | Ground |
NC | NC |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output, high active |
Dimensions
Development Resources
Wiki : waveshare.com/wiki/2.13inch_e-Paper_HAT
