Lever Control Push Pull Pneumatic Air Valve 5/ 3 Way 2 Position4R210-08/3R210-08

 

 

 

Product Features:

2-position 5-way hand-pull valve 4R210-08 Not easy to leak, good sealing, aluminum alloy fine-grained valve body

The inner wall is smooth without burrs, and the inlet seal is not easy to leak

6 high concentric sealing rings, self-lubricating sealing rubber to reduce friction

Increase service life, work stably 0°C ~50°C Lubricated hand lever is convenient and durable

Reversing handle, good air tightness when switching in and out, 5 million times of service life and smooth experience

High-precision machine tool processing, low resistance between the axis and the valve body

Smooth use and accurate positioning

Applicable scene This series of products are widely used in textile, printing, chemical, plastic,

rubber, pharmaceutical, food, building materials, machinery, electrical appliances, surface treatment, etc.

Product parameters
Model: 4R210-08

Working medium: 40um filtered air

Weight: 109.4g

Working pressure: 0.15-0.8Mpa

Operating temperature -5°C ~60°C

Thread specifications: inlet and outlet port (1/4) exhaust port 1 minute (1/8)

Lubrication: not required

Product use attention
1.Before use, pay attention to check whether the components are damaged

during transportation, and then install and use

2: When installing, please pay attention to the gas flow direction and whether the nozzle

shape is correct. The medium must pass through 40 microns.Wave core filter:

3: Please pay attention to whether the installation conditions meet the technical requirements

(such as voltage, working pressure, temperature range, etc.then install using

4: Try to avoid using it in a vibration environment, and pay attention to antifreeze measures at low temperatures;

5: When connecting the pipeline, pay attention that the wrapping of the raw material tape

should not exceed the end face of the joint teeth, and pay attention to remove the inside of the pipeline joint.

dust and dirt, to avoid impurities entering the valve body

6.Please pay attention to dust prevention when not in use, and do a good job of dustproofing the air inlet and air outlet when it is not in use.

7: When adjusting the whole machine, it is recommended to use manual device adjustment first, and then conduct ventilation debugging; 

PushAuction

On 09-Feb-22 at 13:45:32 AEDST, seller added the following information:

DataCaciques