About "HTC-2" product introduction:
Name: Thermometer HTC-2
Size: 10.3*9.3*2.15CM
Material: plastic + electronic components
Battery: 1*AAA 1.5V battery (not include in the package)
Temperature measurement range: -10 degC sim +50 degC (-14 degF sim +122 degF );
Temperature measurement accuracy: plusmn1degC (1.8degF)
Temperature resolution: plusmn0.1degC (0.2degF)
Humidity measurement range: 10% sim 99% RH
Humidity measurement accuracy: plusmn5%RH
Humidity resolution: 1%
Five functions of "HTC-2":
1. Temperature display function: can switch between Celsius or Fahrenheit
2. Clock display function
3. Humidity display function
4. Snooze function: The alarm will ring again after a few minutes after pressing the snooze function.
5. With outdoor detection line: both indoor and outdoor can be measured. Place the probe outside the window to detect outdoor temperature (and remember the highest/lowest temperature in history)
"HTC-2" advantages:
1. Hanging hole: can be hung on the wall
2. Folding stand: can be placed on the desktop
3. Screen: high-quality display, black characters on a light background, clear screen
4. Place the outdoor detection line probe outside the window to detect the outdoor temperature (and remember the highest/lowest temperature in history)
Package list:
1 x Digital Thermometer Hygrometer
User manual :
(1) Install battery--remover battery cover and install battery.
(2) The ℃ and ℉ setting key is covered by the back bracket, press ℃ and ℉ key to switch ℃ and ℉ display.
(3) Time setting--press “MODE”for 2 seconds,then the minutes time will flash. Press “MODE”to switch hour time & minutes time.press “ADJ”button to adjust the correct time.
(4) 12 / 24 hour setting--press “MODE”for 2 seconds,then press “MODE”for 2 times into 12 /24 hr setting, press “ADJ”to adjust 12/24 hr.
(5) Month(M) and Day(D) time setting--press “MODE”for 2 seconds, then the minutes time is flashing, press “MODE”for 3 times into Month and Day time setting, press “ADJ”to adjust correct date,and press “MODE” to switch Month(M) and Day(D) setting.
(6) Nowtime setting--press “MODE”for 1 time to switch alarm setting, press “ADJ”to switch on NowTime function.
(7) Alarm clock setting--press “MODE” for 1 time switch alarm setting; press “ADJ” for 3 times to switch on NowTime and Alarm clock functions; press “MODE” for 2 seconds to alarm clock time setting; press “MODE”to switch Hour and Minute, press “ADJ”to set time.
(8) Under alarm clock setting mode--press “ADJ” will show Calender.
(9) Press “MEMORY” display show minimum temperature&humidity and maximum temperature&humidity.
(10) Press “MEMORY” for 2 seconds to clear Maximum and Minimum.