Beschreibung

KnuKonceptz 0 Gauge 2 Way Fuse Block

The BK-1024 inputs accepts 4 or 0 gauge (20-50mm^2) and output 8 or 4 gauge 8-20mm^2) power wire without the use of adapters. Oversized allen screws can secure either gauge without any modification or additional parts to complicate the design.

Bassik - simple, clean, easy. This is the foundation of what KnuKonceptz calls Bassik. Easy to install, simple to connect and cost effective. This block is shown in satin nickel finish with polished nickel plated allen screws and smoke black base. The BK-1024 includes two fuses to configure this block for power applications.

PLEASE NOTE FUSE SIZE IN eBay ORDER NOTES
Fuses available - 30 / 40 / 50 / 60 / 80 / 100 / 120 / 150
We will ship 100A x 2 if no fuses are noted!

Spezifikationen 

KnuKonceptz BK-1024 2 Way Fuse Block
Dimensions / Maße 60mm(L) x 40mm(W) x 29mm(H) 
Input Gauge / Eingang 0 or 4 Gauge  (20-55mm^2)
Output Gauge / Ausgang 4 or 8 Gauge x 2  (8-20mm^2)
Fuse Type / Sicherung Mini-ANL inbegriffen (2)
Finish / Überzug Nickel Silver / Nickel Silber
Back to top

Häufig gestellte Fragen

Q: How do I determine what size fuses I need for this fuse block?
A: Each output of a fuse distribution block normally is connected to a single amplifier. Each amplifier will have either a fuse on board or the manufacture will state within the manual's installation guide or spec sheet what the max fuse rating or current draw of the amplifier is. If your amp has three 30A fuses on boards, you want a 100A fuse for that particular output of this block (90A is not an option we offer). If the second amp has a single 40A fuse, then a 40A fuse goes into that output of the block and thus a 100A and 40A would be required.
Q: Can I use this block as a ground block?
A: Yes, KnuKonceptz offers ground links to turn this block into a 2 Way Ground Block. These Mini-ANL buss bars replace the fuse and allow the BK-1024 to be used from a common grounding point.
Back to top