The thermometer will work for at least 3 to 6 months with 2 AAA batteries (Not included), no more frequent battery changing is needed. You also don’t need to buy glue or nails to help fix the thermometer if there’s metal nearby, the thermometer can be adsorbed on metal surfaces with the built-in magnet.
The thermometer can be placed wherever you want, and it can be hung more conveniently with the lanyard.
The Wi-Fi Gateway can be used in conjunction with relevant Bluetooth thermometers and hygrometers or Wireless thermometers and hygrometers to help that equipment to connect to the server through Wi-Fi.
Search the INKBIRD app from Google Play or App Store to download it for free.
Please make sure all the following requirements are met to download the INKBIRD app smoothly:
If the Wi-Fi gateway is not connected to your phone, the light of the Wi-Fi button will flash rapidly by default. Press and hold the button for about 5 seconds to switch to AP mode, the light of the Wi-Fi button will flash slowly in the mode 5 seconds later.
1. Open the INKBIRD app and click “+” to start the connection.
2. Plug in the Inkbird Wi-Fi Gateway, choose the IBS-M1 Wi-Fi gateway, click “AP Mode” of the right top corner, check if the light of the Wi-Fi button is blinking slowly and confirm on your app if it is, then enters your Wi-Fi password to connect to a wireless network, click OK to connect the device.
3. The INKBIRD app will redirect to your phone’s WLAN Setting interface, select the “SmartLife-XXXX” to directly connect to the router without typing in a password. Go back to the INKBIRD app and enter the automatic connection interface to click“Done”.
4. Connection succeeds.
Press and hold the “Wi-Fi” button for 5 seconds to reset the Wi-Fi, then repeat the steps above to connect with your phone.
The device only supports 2.4GHz Wi-Fi router.