About the item:
  • With this new advanced lens adapter, you can mount Leica M Mount Lens on Fujifilm FX mount camera body.
  • There are no electrical contacts in the adapter ring. Exposure and focus has to be adjusted manually.
  • It is designed for Fujifilm X-Pro1 interchangeable lens digital camera, not suitable for S2Pro/S3Pro /S5Pro DSLR camera or other X-series prosumer digital camera.
  • With precise design and high technology.Made of brass and aluminum (not plastic).
  • Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.
                     


                                                                                                                 

Features:
  • Allows focus infinity.
  • Diaphragm control of the lens is set manually.
  • Made of brass and aluminum (not plastic).
  • Made of metal sealing ring, much tighter. Laser fonts, much durable
Suitable for:
  • M42 Mount Lens
  • Fujifilm X Mount Camera: X-Pro1, X-Pro2, X-T1, X-T2, X-T10, X-T20, X-E1, X-E2, X-E2S, X-A1, X-A2, X-A3, X-A10, X-M1 etc
Note: It is designed for Fujifilm X-Pro1 interchangeable lens digital camera, not suitable for S2Pro/S3Pro/S5Pro DSLR camera or other X-series prosumer digital camera.

No Lens Attached' - Warning Message Appears:
  • The camera needs to be set to function without an E-Mount lens attached. You can do this by changing the following camera setting: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location of this option may change depending on camera model). If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default. Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released


  • If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.
  • Although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate while using this adapter.There is no electrical contacts in the adapter ring. Full manual operation, manual focus, manual iris adjustment can be achieved with body manual exposure, aperture priority exposure.In this case "stop-down mode" will need to be used when metering since the lens does not have the ability to have its aperture controlled by the camera body.You can shoot in Manual or Aperture Priority Mode. Before use, set your camera Menu: "Shoot without lens".