• Features:
  •  
  • 1. APPLICATION: Caterpillar 3406E, C-15 and C-16.(J-42083 Timing Pin can be used on most Caterpillar Engines!)  
  • 2. MATERIAL: Durable steel for Timing Pin and Engine Barring Socket. Aluminum Alloy construction with extreme anti-wear property for Injector Height Gauge Tool.  
  • 3. A MUST HAVE: Alternative to Caterpillar J 42083, 9S9082 and 9U-7227.Injector height should be properly maintained if maximum performance and economy are to be obtained.  
  • 4. FUNCTION: Great hand tool for turning over engine, Simplifies TDC valve/injection timing, makes adjusting injectors and valve lash easier. Accurately adjust the Injector Height of the engine.  

    • VISA-POWER

    For Caterpillar J 42083 Automatic Timing Pin & 9U-7227 Injector Height Adjustment Gauge Tool & Engine Barring Socket Fits CAT 3406E, C-15 and C-16

    Features:

     

    1. APPLICATION: Caterpillar 3406E, C-15 and C-16.(J-42083 Timing Pin can be used on most Caterpillar Engines!)
     

    2. MATERIAL: Durable steel for Timing Pin and Engine Barring Socket. Aluminum Alloy construction with extreme anti-wear property for Injector Height Gauge Tool.
     

    3. A MUST HAVE: Alternative to Caterpillar J 42083, 9S9082 and 9U-7227.Injector height should be properly maintained if maximum performance and economy are to be obtained.
     

    4. FUNCTION: Great hand tool for turning over engine, Simplifies TDC valve/injection timing, makes adjusting injectors and valve lash easier. Accurately adjust the Injector Height of the engine.
     

    5. SATISFACTION GUARANTEE: If you are not satisfied with our products, simply asked money back guarantee with 12 months warranty. No worry about buying!

     

    Descriptions:

    Benefits:
    1. The J 42083 Automatic Timing Lock turns two person task of finding Top Center Compression Position for the number 1 piston 
    (the starting point for all fuel timing and valve clearance procedures) 
    into a simple quick one person procedure. 
    2.Time saver! Increase speed and efficiency. Takes less time to turn the engine over.

     

    Injector Height Adjustment Tool is Easy & Convenient to use


    Just put our Injector Height Tool on the injector, then you will get exactly 78 mm height on the injector! 

     

    J42083 Caterpillar Timing Lock Pin Instructions


    1. Remove the plug from either the left or right side timing access holes. 
    2. To install, hand tighten the J42083 Automatic Timing Pin Lock into the timing access hole. 
    3. Preload the spring on the automatic timing lock by pushing the slide handle forward and turn it clockwise to engage either of the two locking slots. 
    4. Manually, turn engine in direction of rotation(usually counter clockwise..refer to Caterpillar Service Manual) until a notice “click” sound is heard. The automatic timing pin plunger has now engaged the flywheel timing holes in either the top center compression or exhaust stroke. 
    5. To remove, turn slide handle counter clockwise to release spring tension on the plunger(if plunger doesn’t retract from flywheel with light pressure, jog the flywheel back and forth). Unscrew from flywheel housing.

     

    Engine Barring Socket Instructions


    1. Insert the tool into the flywheel housing until it engages the ring gear
    2. Then attach a 1/2-Inch square drive ratchet or breaker bar and turn.

     

    Package Includes:

     

    1 X Automatic Timing Pin
    1 X Engine Barring Socket
    1 X Injector Height Adjustment Tool-Red



    Payment

    1. Payment methods accepted: Payoneer.  Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.

    2. All major credit cards are accepted through our secure payment processor Payoneer.

    3. We ship items to Your Ebay address.Please make sure your Ebay address is correct  before you pay, cause it cannot be changed once the order shipped out.

    Shipping

    1. Item will be shipped out within 1-2 business day after clear payment received.

     

    2. Please make sure shipping address on your Ebay account is correct & up-to-date.

     

    3. All of our items are shipped from our US warehouse.

     

    4. Please feel free to contact us by email if you cannot get your order in time.

     

     

    Please read the shipment and payment detail carefully before you bid.

     

    Returns

    1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).


    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to 20% re-stocking fee.


    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

     

    Contact Us

    Please contact us via ebay using"Contact member". 

    We will respond within 1 business day or less.Thank you for your understanding.

    Our office hours is as below :


    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
    - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday

     


    And our office is closed on Sunday and public holidays (Hong Kong)
    We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member".

    We will respond within 1 business day or less. 

    Please include your ebay item number or order number in all communications.

    VISA-POWER

    Shop Category
     Store Home
     New Arrival !
     DIY Blacksmith Accessories
     Outboard Boat Accessories
     ATV UTV Truck Accessories
     Caterpiller CAT Accessories
     DD/GM/LS Engine Parts
     Volvo & Mack Accessories
     Oil Filter Wrench Caps
     Car Accessories
     Jeep Wrangler Accessories
     Ford Mustang/F- Accessories
     Dodge Accessories
     Chevrolet Accessories
     Motocycle Accessories
     Tools
     Peterbilt Accessories
      Lawn Mower Parts
     Other
    High Recommended
    content_src_url
    content_src_url
    content_src_url
    Automotive Part Tool
    Crankshaft Gear&Front Crank Seal Installer JDG954B for John Deere 1039 4045 6059
    USD 189.97
    Front & Rear Crankshaft Seal Remover Installer Kit for Cummins ISX QSX ISX15/12
    USD 375.58
    3162992 Front Crankshaft Seal Remover & Installer Kit for Cummins ISX QSX Diesel
    USD 197.00
    61850 Truck Hub Seal Installer Set for Class 7 & 8 M Duty & Road Trucks Trailers
    USD 104.95
    Knife Making Tongs Bladesmith Tong Set & Blacksmith Hammer 1.5 kg Forge Tools
    USD 131.97
    6.0L 6.4L Front & Rear Crankshaft Seal Wear Ring Installer Remover Set For Ford
    USD 799.99
    Front & Rear Crankshaft Seal Wear Sleeve Installer For CAT 3406 3408 C-15
    USD 272.99
    Transmission Pto Fast Cooler Manual Trans for GM NV4500 NV5600 G56 Ford ZF 5
    USD 97.89
    4531 Harmonic Balancer Puller Installer Set for Harmonic Balancers Drive Pulleys
    USD 93.50
    Cummins NT 855 & N14 Rear Seal & Wear Sleeve Installer Tool Alt ST-262 4919705
    USD 259.00
    3163021 3163069 For Cummins ISX QSX Timing Injector Cam Gear Puller Tool Kit
    USD 94.99
    Double Clutch Dry DPS6 Transmission Installer Remover Tool for Ford Volvo Focus
    USD 159.98
    60" LED Tailgate Strip Light Bar Reverse Brake Turn Signal Light for Car Truck
    USD 15.97
    Hot Item
    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For Caterpillar J 42083 Automatic Timing Pin & 9U-7227 Injector Height Adjustment Gauge Tool & Engine Barring Socket Fits CAT 3406E, C-15 and C-16

    Features:

     

    1. APPLICATION: Caterpillar 3406E, C-15 and C-16.(J-42083 Timing Pin can be used on most Caterpillar Engines!)
     

    2. MATERIAL: Durable steel for Timing Pin and Engine Barring Socket. Aluminum Alloy construction with extreme anti-wear property for Injector Height Gauge Tool.
     

    3. A MUST HAVE: Alternative to Caterpillar J 42083, 9S9082 and 9U-7227.Injector height should be properly maintained if maximum performance and economy are to be obtained.
     

    4. FUNCTION: Great hand tool for turning over engine, Simplifies TDC valve/injection timing, makes adjusting injectors and valve lash easier. Accurately adjust the Injector Height of the engine.
     

    5. SATISFACTION GUARANTEE: If you are not satisfied with our products, simply asked money back guarantee with 12 months warranty. No worry about buying!

     

    Descriptions:

    Benefits:
    1. The J 42083 Automatic Timing Lock turns two person task of finding Top Center Compression Position for the number 1 piston 
    (the starting point for all fuel timing and valve clearance procedures) 
    into a simple quick one person procedure. 
    2.Time saver! Increase speed and efficiency. Takes less time to turn the engine over.

     

    Injector Height Adjustment Tool is Easy & Convenient to use


    Just put our Injector Height Tool on the injector, then you will get exactly 78 mm height on the injector! 

     

    J42083 Caterpillar Timing Lock Pin Instructions


    1. Remove the plug from either the left or right side timing access holes. 
    2. To install, hand tighten the J42083 Automatic Timing Pin Lock into the timing access hole. 
    3. Preload the spring on the automatic timing lock by pushing the slide handle forward and turn it clockwise to engage either of the two locking slots. 
    4. Manually, turn engine in direction of rotation(usually counter clockwise..refer to Caterpillar Service Manual) until a notice “click” sound is heard. The automatic timing pin plunger has now engaged the flywheel timing holes in either the top center compression or exhaust stroke. 
    5. To remove, turn slide handle counter clockwise to release spring tension on the plunger(if plunger doesn’t retract from flywheel with light pressure, jog the flywheel back and forth). Unscrew from flywheel housing.

     

    Engine Barring Socket Instructions


    1. Insert the tool into the flywheel housing until it engages the ring gear
    2. Then attach a 1/2-Inch square drive ratchet or breaker bar and turn.

     

    Package Includes:

     

    1 X Automatic Timing Pin
    1 X Engine Barring Socket
    1 X Injector Height Adjustment Tool-Red



    1. Payment methods accepted: Payoneer.  Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.

    2. All major credit cards are accepted through our secure payment processor Payoneer.

    3. We ship items to Your Ebay address.Please make sure your Ebay address is correct  before you pay, cause it cannot be changed once the order shipped out.

    1. Item will be shipped out within 1-2 business day after clear payment received.

     

    2. Please make sure shipping address on your Ebay account is correct & up-to-date.

     

    3. All of our items are shipped from our US warehouse.

     

    4. Please feel free to contact us by email if you cannot get your order in time.

     

     

    Please read the shipment and payment detail carefully before you bid.

     

    1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).


    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to 20% re-stocking fee.


    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

     

    Please contact us via ebay using"Contact member". 

    We will respond within 1 business day or less.Thank you for your understanding.

    Our office hours is as below :


    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
    - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday

     


    And our office is closed on Sunday and public holidays (Hong Kong)
    We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member".

    We will respond within 1 business day or less. 

    Please include your ebay item number or order number in all communications.


    All right reserved.