S14/S15 200sx/Silvia/R33/R34 HICAS delete bar with toe arm mounts Free Shipping

FAQs

What is the advantage of replacing the HICAS steering rack? Removing the HICAS steering rack gives you more predictability of the rear of your vehicle. A must if you plan on drifting your car or taking it to the track. What does HICAS actually do? The HICAS system is meant to help with handling however given that the technology is 20 or so years old, it's certainly not great and is hated by most. Chances are if you have felt HICAS work while driving with a bit of excitement, you want to remove it ASAP! How do I know if my car has HICAS or not? HICAS equipped cars have a power steering reservoir level sensor built into the cap and two wires and a float inside the reservoir. If you lift off the power steering cap with those wires the HICAS light will turn on when you start the car. Looking under the rear of the car you will also find hydraulic hoses and another steering rack device hooked to the differential and the rear suspension to steer the rear wheels. When the key is turned on and motor not started the warning lights come on (HICAS) light shows up then too. Will this HICAS lock bar fit my car? We can only guarantee fitment for the vehicles listed above under Vehicle Compatibility. If your car is not listed there then we don't know if it will fit your car. Please don't ask us as we do not know the answer. Will my HICAS light stay on if I install this HICAS lock bar? Yes, the HICAS light on your dash will stay on if the ECU thinks that it's not working correctly. This can easily be resolved by removing the bulb for the HICAS warning light behind the dash. Is there anything else that I need to install this HICAS lock bar? Yes, unlike a regular HICAS lock out bar this unit is designed to be used in conjunction with regular toe arms. Regular toe arms need to be purchased and also you'll need to replace the bushes on the knuckle side (we sell both).

Compatibility

Compatibility Specifics

- Nissan Skyline R33 GTR (Non-Finned Rear diff cover only) - Nissan Stagea S2 RS4S NOTE: To be used with S13/180sx/R32 toe arms (with 40mm bearing spacing) |NOTE:#2:| Includes nuts and bolts to mount the toe arm