PACKAGE CONTENT :( NOT include Raspberry Pi board.)
2.13inch e-Paper HAT x1
WIki English manual: waveshare.com/wiki/2.13inch_Touch_e-Paper_HAT
Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect
Ideal for price tags, shelf labels, industrial instruments...
2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels
Supports waken up by user-defined gesture
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
SPI interface, for connecting with controller boards like Arduino/STM32, etc.
OPERATING VOLTAGE | 3.3V | GREY SCALE | 2 |
INTERFACE | 3-wire SPI, 4-wire SPI | PARTIAL REFRESH TIME | 0.3s |
OUTLINE DIMENSION | 69.15 × 38.90mm | FULL REFRESH TIME | 2s |
DISPLAY SIZE | 48.55 × 23.70mm | REFRESH POWER | 26.4mW(typ.) |
DOT PITCH | 0.194 × 0.194mm | STANDBY CURRENT | <0.01uA (almost none) |
RESOLUTION | 250×122 pixels | VIEWING ANGLE | >170° |
DISPLAY COLOR | black, white | TOUCH POINT | 5 (max) |
Compatible With Raspberry Pi Series Boards
I2C For Touch Panel, SPI For Display
VCC | 3.3V |
GND | GND |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data / Command selection (high for data, low for command) |
ERST | External reset, low active |
BUSY | Busy status output, high active |
INT | Touch controller interrupt signal |
SCL | Touch controller I2C clock pin |
SDA | Touch controller I2C data pin |
TRST | Touch controller reset, low active |