Features:

1.Alarm Output
With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.

2.Supports 3 Wires Sensors
3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller

3.SSR Output
With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included

4.Digital Display ℃/℉
It’s a digital PID controller but also supports Centigrade and Fahrenheit reading

5.2 Temp Displaying Windows
The real-time temperature and the setpoint are shown at the same time

40A SSR Solid State Relay
Load Voltage: 24~380VAC Load Current: 40A Input Voltage: DC 3~32V

K Type Thermocouple
  • Temperature rang :0-400℃
  • Sensor Dia: 0.18inch (4.5mm)
  • Cable Length: 6.6ft(2m)
  • External Shielding: Insulated Shielding
  • Internal Insulation: Fiberglass

White Heat Sink
  • Screw Thread: M4
  • Roof: 50mm x 60mm.
  • Foot: 80mm x 50mm.
  • Height: 50mm

What You Get
  • 1x PID Temperature Controller (ITC-106VH)
  • 1x 40A SSR 1x Mounting bracket 
  • 1 x K type Thermocouple
  • 1x Manual
PID controller Specification

PID

wiring

PID Temperature controller

DataCaciques