|
Features:
100% Brand New
Motor brushless controller for Electric bicycle & scooter
Rated voltage: 48 V
Rated current : 31A
Rated power: 500 W
Matching motor: brushless motor
Under Voltage Protection:41V
Throttle voltage: 1V to 4.2V
Phase angle: 60/120 degrees
Brake level: Low /High
Heat dissipation: Natural cooling
Ambient temperature: -20 degrees to 50 degrees
Protection grade: IP55
Dimensions::15cm(L)x8cm(W)x4cm(H)
12Pcs MOS Tubes
Operation Notice: Connect power, motor, and throttle, and power lock, but not connect the Hall lines. Connect the adaptive learning wire
Switch on the power lock, roll the throttle. If the motor works well, connect the Hall lines
If the motor rolling reversely, disconnect the adaptive learning wire and check the motor again, before connecting the Hall wire.
Wires Interface Definition:
Battery : Thick Black (Power Negative) /Thick Red (Power Positive)
Power Lock: Thin Red(power lock)
Motor : Thick Green(Phase lines) /Thick Yellow (Phase lines) /Thick Blue (Phase lines)
Motor Hall lines: Red(+5V)/Black(Negative) /thin Yellow(Hall lines) /thin blue(Hall lines) /thin green(Hall)
Adaptive Learning: Thin white /Thin white, connect together
Brake(High): Thin yellow(Brake signal)
Brake(Low):Thin Purple(Brake signal)/Thin Black(Brake Negative)
Throttle: Thin Red(Throttle Positive) / Thin Black(Throttle negative)/ Thin Green(Throttle signal)
Instrument: Thin Green(Instrument signal)
Cruise: Thin Blue(Cruise Signal)/Thin Black(Cruise negative) ,connect together
Speed : Thin Brown(High Speed signal)/Thin Black(Speed negative)/Thin Blue(Low Speed Signal)
Antitheft power: Thin Black (Power Negative) /Thin Red (Power Positive)
Antitheft Signal: Thin Orange(Power lock) / Thin Blue(Alarms output)/ Thin Green(Signal )
Reverse :Thin Brown(Reverse signal)/Thin Black(Reverse Negative)
Package Including: |
