The supply and return line are both 1/4" NPT, Features a barbed vent fitting that is oven brazed, Includes a heavy-duty 10 gauge no-warp mounting plate, Will withstand up to 100 PSI and comes with an in-tank wire harness, Ideal for the GM LS fuel injection application for 58+ psi is required
Tanks GPA-4 In-Tank Fuel Pump Module, GPA Series, 100 Psi Tanks
Tanks GPA-4 In-Tank Fuel Pump Module, GPA Series, 100 Psi
Sku # 9107602
Mfr. Part # GPA-4
Condition
New
Brand
Tanks
Sold
Each
Details
Info

The GPA-Series Fuel Pump Module is designed to be used in many die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.

The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because they include gaskets and screws with our tanks.)

The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector. It is yellow-zinc plated to prevent corrosion.

  • Made in the USA
  • Heavy 10 gauge no-warp mounting plate
  • 1/4" NPT Supply and Return Line
  • Barbed Vent Fitting
  • Oven brazed fittings
  • Up to 100 PSI
  • In-tank wire harness
  • Genuine Walbro Fuel Pump - 255 Liters Per Hour up to 650 hp
  • Ideal for the GM LS fuel injection application for 58+ psi is required
  • Works with tanks up to 11" deep
  • Can be shortened to work in tanks with a minimum of 6"
Specs
  • Outside Diameter 3-5/16"
  • Bolt Pattern 6 holes on 2-3/4 bolt circle
  • This pump does not included mounting gasket
Installation Tips

GPA-4 pumps cannot be used with Pulse Width Modulation. If using with a FiTech system be sure to turn off.

These pumps are designed to work with Tanks Inc fuel tanks with built in fuel trays.
As it comes will work with tanks up to 11" deep.
Hoses can be shortened to work in tanks as shallow as

6" deep.

Specs
Sold in Quantity
Each
Fuel Type
Gasoline
Fittings Included
No
Fuel Pressure Regulator Included
No
Fuel System Type
EFI
MFG. Part #
GPA-4
Maximum Pressure
100
Electric Fuel Pump Type
In Tank
Electric Fuel Pump Inlet Fitting(s)
1/4" NPT Female
Electric Fuel Pump Outlet Fitting(s)
1/4" NPT Female
Free Flow Rate
67 GPH / 255 LPH
Inline
No
GTIN Code
691852326075
Reviews

THE KIT IS A SIMPLE YET POWERFUL FUEL PUMP FIX FOR UPGRADE

Rated
Product Rating
by MACGIVER JOB on September 15, 2021

Summary: ONE COMPLETE KIT WITH ALL OF THE PARTS NEEDED TO MAKE YOUR FUEL DELIVERY IN THE TANK UPGRADE

Yes, I recommend this product.

Great pump

Rated
Product Rating
by Dave on December 24, 2020

Summary: EFI pump does the job

Cons: No gasket

Pros: It fits the tank

Yes, I recommend this product.

Fit the design of a custom fuel tank

Rated
Product Rating
by dave on September 04, 2019

Summary: Fit design of a custom fuel tank

Yes, I recommend this product.

Great product, quality and customer support.

Rated
Product Rating
by Sam on January 21, 2019

Summary: Used on our 66 Mustang with a fuel injected 5.0, and exceeds the performance needed.

Pros: Easiy to install

Yes, I recommend this product.

Worked perfect with AN-6 fitting...going into a '32 tank

Rated
Product Rating
by Gearman on October 19, 2018

Summary: See attached photos showing min./max. length for pump application.

Yes, I recommend this product.

Related Items / Suggested Parts
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.