Voltage: 220V
Power: ≤500W
Temperature range: 50°C~400°C
Temperature Stability: ±2°C (Static)
Heating area size: 120x120mm
Body size: length 250 x width 220 x height 90mm±5mm
Weight: 3.1kg
Working environment: 0~40°C/32~ 104°F
Storage Environment: -20~80*C/-4~176°F
Storage humidity: 35%~45%

Features:
*Imported infrared ceramic heating body, fast heating, high efficiency and long service life.
* Comes with a thermometer for easy detection of PCB temperature.
*Sensor closed loop PID control, the temperature is accurate and stable.
*It can be used for the preheating of circuit boards, and other processes that require uniform heating as a whole.
*Anti-static design.

operate:
A: Preheat the original (to be used with the desoldering tool)
1. Plug in the power plug, put the PCB on the board clip, and place the original to be processed in the center of the preheating table.
2. Set the temperature according to the size of the components and the thickness of the PCB, turn on the power switch, the preheating station will be ready; immediately heat up to your suitable temperature, and then keep the temperature constant.

B: Remove the original
1: Set up the PCB board to be processed, and place the components to be removed in the center of the preheating plate.
2: Set the temperature according to the size of the component, the thickness of the circuit board, and the melting point of the tin on the PCB.
3: Set the temperature, and after the temperature reaches a constant after the temperature rises, pay attention to observe that the tin points of the component feet begin to appear bright. Use tweezers to pick up the component when you see that the tin points of the component feet are melted. When the component is removed, the PCB board cannot be moved immediately, so the tin points of the pins of each component on the PCB board are near the melting point, and moving the PCB board will displace other components. At this time, the power should be turned off, and the PCB board should not be removed until the temperature of the PCB board drops to normal temperature.