Delivery from Australian warehouse, fast delivery
Outboard motor Product parameters:
1.Length:92cm, Width:32cm, Height:29cm
2.Height of transom plate:72.35cm
3.Net Weight:10.88KGS
4.Range of operation for throttle opening:5000--6000RPM
5.Displacement :53.20CC
6.The maximum power output:2.8KW
7.Model:4 -stroke,air cooled
8.Ignition system:C.D.I.
9.Starting system:Manual starting
10.Starting carburetor circuit:Choke valve starting
11.Propeller diameter:18cm
12.Ratio for engine and screw gear:2:1
13.Transmission ratio:27:13
How to start the 4 stroke outboard motor?
1.Put 270 ml engine oil in the oil ta
2.Fill gasoline in the oil tank.
3.Press prime bubble for several times
4.Move the chock lever to the position "Z"
5.Press the on-off switch to "I"
6.Pull the starter to start the engine
7.Push the chock return to the original position
8. Turn the handle from "L"(low) to "H"(High) or from "H" to"L" to control the speed of engine.
9.Move the handle bar to change the direction of the machine.
10.Press the on-off switch to "O" to stop the engine.
Tips:
1.Please add 270ml 4 stroke engine oil by the measuring cup. Or extra oil will leak.
2.Please check the status of engine oil before each using.Make sure that the engine oil can reach the second scale of oil level gauge.
3.Clean the air filter each time after 5 hours operating.
Outboard motor Product parameters:
1.Length:92cm, Width:32cm, Height:29cm
2.Height of transom plate:72.35cm
3.Net Weight:10.88KGS
4.Range of operation for throttle opening:5000--6000RPM
5.Displacement :53.20CC
6.The maximum power output:2.8KW
7.Model:4 -stroke,air cooled
8.Ignition system:C.D.I.
9.Starting system:Manual starting
10.Starting carburetor circuit:Choke valve starting
11.Propeller diameter:18cm
12.Ratio for engine and screw gear:2:1
13.Transmission ratio:27:13
How to start the 4 stroke outboard motor?
1.Put 270 ml engine oil in the oil ta
2.Fill gasoline in the oil tank.
3.Press prime bubble for several times
4.Move the chock lever to the position "Z"
5.Press the on-off switch to "I"
6.Pull the starter to start the engine
7.Push the chock return to the original position
8. Turn the handle from "L"(low) to "H"(High) or from "H" to"L" to control the speed of engine.
9.Move the handle bar to change the direction of the machine.
10.Press the on-off switch to "O" to stop the engine.
Tips:
1.Please add 270ml 4 stroke engine oil by the measuring cup. Or extra oil will leak.
2.Please check the status of engine oil before each using.Make sure that the engine oil can reach the second scale of oil level gauge.
3.Clean the air filter each time after 5 hours operating.