Product Description
For RAM 1500 TRUCKS (DT Models) 2019-2022
【No sensor programming Required】:
The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".
Simplified Relearn : OBDII required
*Installation of TPMS is recommended to be performed only by trained professionals.
Installation Process
Ⅰ. Loosen the tire: Remove the valve cap and core and deflate the tire.
Ⅱ. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
Ⅲ. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
Ⅳ. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
Ⅴ. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
WARRANTY: 2 years
Warranty Type: Replacement Warranty
Any question will be replied within 24 hours except the weekend and holiday.
We will reply to you once we get your messages.
Problem be solved are better than negative feedback,
If the parts are damaged on the way or have fault,
please send problem description or take picture about problem and our Customer Service
and Technical Department will work it through with you. pictures and videos can come in handy here.