Action
Treatment consisting of Arginine, Acai Extract and Acetic Acid (acid ph).
Acai Extract: rich in nutrients such as Vitamins, Essential Sugars and Emollient Oils. Its antioxidant and protective action promotes a complete regeneration of the strands, hydrating them efficiently and for a long time.
Amino acids: balance the structure of the threads of aggressions caused by the excessive use of dryers and flat irons. It increases its suppleness and elasticity, leaving hair smoother and extremely easy to comb.
Phytonutrients: Nourishes and protects the hair, helping to regenerate damaged and worn parts.
Shampoo with Acetic Acid: as it has an acid pH, it can cause irritation and peeling of the sensitized leather. For this reason we recommend not to apply to pregnant women, people with sensitive skin and children under 12 years.
Note: Offers about 2 applications. Certified by Micro Quality Labs (USA) and by Anvisa. The effect is prolonged with the use of the Plastic maintenance products from Cadiveu threads.
It should not be applied to pregnant women, people with sensitive scalps and children.
Try CADIVEU PROFESSIONAL PLASTIC WIRE KIT HAIR PLASTIC SURGERY THERMAL SEALING (3 PRODUCTS) and see the results.
Application Council
Material required: silicone gloves, hair dryer, board, plastic clips, fine comb, brush and plastic container.
1- Wash your hair with the Pre-Treatment Shampoo, massaging until it forms a foam. Wash twice for virgin, very resistant or very dirty hair. Leave on for 5 minutes and rinse thoroughly. Attention: do not rub the scalp.
2- Dry the hair at 80% with the hair dryer and the help of your fingers.
3- Separate the hair into 6 parts (a vertical line separating the hair into two strands - right and left - and 3 horizontal sections - nape, middle and front from the ears). Secure each session in a bun with a loop.
4- Pour 20 to 40ml of the Heat Seal into a container and put on the silicone gloves.
5- Start applying a lock of the nape with the help of a brush. Apply two fingers from the root at the base of the lock and pull the product to the ends with the comb. Make sure the product is on all wires.
6- Repeat the procedure with the lock on the side.
7- With the dryer on the cold jet, dry both strands at 100%. It is important to dry two locks at a time with the cold jet. This prevents the formation of smoke and prevents the product from evaporating without effect.
8- Repeat the procedure from 5 to 7 on the two central locks of hair, one at a time.
9- Finally, repeat the procedure from 5 to 7 on the two front strands of hair, drying the strands backwards. It is important that neither the wind from the dryer nor the strand with the product come into contact with the face.
10- Time to surf! In hair that is blond, damaged or with chemicals, the board temperature should not exceed 200°C. In normal, virgin or temperature resistant hair it should be at 230°C.
11- Divide the hair again into parts using barrettes. Separate a thin, linear lock and iron the length (without the ends) of the lock 10 times (plank at 200°C) or 7 times (plank at 230°C).
12- Clip the ends (without the length) of the hair up to 4 times (flat at 200°C) or 2 times (flat at 230°C). This way you avoid the artificial smooth effect on the ends.
13- Repeat this process (step 11 and 12) for all the hair strands. The straight flat iron in relation to the leather makes the strands smoother naturally from the roots.
14- After ironing all the locks, rinse your hair well.
15- Apply the Restorative Mask over the strands, massaging gently as strands. Leave on for 5 minutes and rinse again.
16- Dry your hair with a blow dryer.
Note: In the case of relaxed or straightened hair, apply a Thermal Plastic Wire Seal after the chemical process. In the case of dyeing or toning, apply a Plastic Thermal Sealing of Threads two days before or after dyeing, for better correction of the color pigments in the threads.