Features:
1.Allows you set the temperature you want the cooling fan to operate between 0℃～120℃
2.Suitable for use with any after-market Cooling Fan with 12V
3.The Fan will kick in at the selected temperature and then switch of when the engine temperature goes back down
4.To fit in the hose simply remove the top radiator and fully insert the probe, then re-fit hose and tighten over the capillary wire being extra careful not to damage the probe inside. Silicone sealant can be used to help seal if required.
 
Specifications:
Voltage:12V
Material: Steel and Plastic
Temperature range: 0℃～120℃
Accuracy:4±2℃
Temperature bar length:104mm
Temperature sensing rod diameter:5mm
Capillary length:1000mm
 
Wiring Instructions:
C Terminal = 12v Feed
No2 Terminal= Power out to the fan
(the switch is earthed through the fan)
No1 Terminal= Leave blank, this is not required for this application
You can also wire a relay in if you wish, but this is not a requirement.
 
Package Included:
1x Switch Kit Set
Features:
1.Allows you set the temperature you want the cooling fan to operate between 0℃～120℃
2.Suitable for use with any after-market Cooling Fan with 12V
3.The Fan will kick in at the selected temperature and then switch of when the engine temperature goes back down
4.To fit in the hose simply remove the top radiator and fully insert the probe, then re-fit hose and tighten over the capillary wire being extra careful not to damage the probe inside. Silicone sealant can be used to help seal if required.
 
Specifications:
Voltage:12V
Material: Steel and Plastic
Temperature range: 0℃～120℃
Accuracy:4±2℃
Temperature bar length:104mm
Temperature sensing rod diameter:5mm
Capillary length:1000mm
 
Wiring Instructions:
C Terminal = 12v Feed
No2 Terminal= Power out to the fan
(the switch is earthed through the fan)
No1 Terminal= Leave blank, this is not required for this application
You can also wire a relay in if you wish, but this is not a requirement.
 
Package Included:
1x Switch Kit Set
DataCaciques