Specification:
Product Name: Remote Control Duplicator
material: plastic
Size: 6CM
Working voltage: DC12V (excluding 27A battery)
Working current: ≤ 8mA
Operating frequency: 433MHz
Modulation Mode: ASK (AM)
Transmission power: ≤ 100 mW
Launch distance: 100 m (proof)
Encoding Type: Self-replicating
Operating temperature: -10°C to +50°C
Suitable for the following remote control IC modules (please check your original remote control before ordering), your remote control should also be a fixed code or a learning code. AX5326-3, PT2262, PT2260, EV1527, FP527, PT2242, HT600, HT680, HT6207, HT6010, HT6012, HT6014, AX5326 4, SMC918, PT2240, HT6013, HT6013.HT12D, etc.
Application areas: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products
Parts List:
1 x Remote Control Duplicator
Other instructions:
How to program:
Step 1 – Delete the existing code for the remote copier
1) Press and hold the A and B buttons at the same time - the Led will flash 3 times
2) Keep pressing the A button and release the B button
3) Hold down the A button and press the B button 3 times, the Led will start blinking
Now press any key on the remote control, the LED light is not on, so the deletion of the code is successful; if the button is pressed, the LED light is on, indicating that the original code has not been deleted!
Step 2 - Clone the original remote
1) Place the two remotes in a back-to-back position. Make sure they have a direct connection
2) Click and hold 1 button on the original remote and 1 key on the cloned remote. Keep holding until the led light flashes 2 times, then 3 times, and then goes to a steady state, you have cloned successfully. (left click to follow above)
If for some reason the clone doesn't move on, it flashes 2 times, which means the signal isn't going through, move the remote slowly up and down until it gets to where it wants to go.