Included：

1 X 4 Row Aluminum Radiator

1 X Aluminum Shroud

1 X 16"Fan

1 X Relay Kit

Radiator Size

Row: 4 Row Core
Material: Full Aluminium
Radiator Cap: included
Core and Tank: All Aluminum
Core Size: 518 W * 430 H * 62 T mm
Overall Size: 590 W * 581 H * 129 T mm
Inlet/Outlet: 38/38 mm

Transmission: Manual.

Vehicle Fitment

FOR TOYOTA LANDCRUISER 40 SERIES HJ45 HJ47 2H DIESEL MT

Fans Details：
Diameter : 16'' (Blade to Blade)
Number of Blades: 10 pcs 
Maximum Fan CFM（Cubic Feet per Minute）: 3,000 cfm
Maximum Fan RPM（Revolution(s) Per Minute）: 2,250 rpm
Max. Amp Draw: 15amp
Voltage: DC 12V
Wattage: 120W

Our electric fan has a 120w power motor, which is more powerful and efficient than other inferior fans selling on market. Most fans on Ebay has a motor power of 80w, which cannot provide enough cooling for the engine. Moreover, they are usually assembled by the straight blades, it is cheaper and poor-quality and easy to get broken.

1. 120W electric motor to provide strong power and high rotation speed
2. S Blade pull push design, to make air flow more efficient and bring more cooling Effect
3. Lightweight and thin volume design, not only to save more engine bay space and also looks very well.
4. Provide extra temperature relay switch.

Probe typically threads into radiator, water outlet or manifold.

Radiator Description：

Our Radiator is made of AA5052 aircraft aluminum. Its different from other sellers T-3303 Series. In fact, AA5052 series Aluminum is much better than T-3303 series.

More than 90% of aftermarket manufacturers use the T-3303 series Aluminum, because it is cheaper and easier to get the material. However, T-3303 aluminum has many disadvantages, such as poor polishing effect, softness, easiness to scratch and corrode, poor heat dissipation effect. If the T-3303 aluminum radiator is operated in high pressure and high temperature for a long time, the leaking problem would occur very soon.

 

AA5052 Aluminum is an Al-Mg alloy with good corrosion resistance, excellent reliability and cold work ability and strength. The main alloying element of AA5052 is magnesium, which has good forming and processing properties. It is widely used in the manufacture of aircraft fuel tanks, oil pipes, and sheet metal parts of transportation vehicles and ships, hardware products, and electrical-appliance casings.

 

This AA5052 Aluminum Radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This AA5052 Aluminum Radiator is at least 30%-45% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.

 

Features:

1. Made from Aircraft AA5052 grade aluminum for prolonged lifespan and with raw aluminum finish

2. Brazed core technology to guarantee optimum performance and dependability

3. All AA5052 Aluminum 2mm thick tanks and fittings,Ensure it's hard and durable

4. Billet Aluminum CNC machined fill neck rugged and durable

5. 16lbs ergonomic design CNC machined cap with Engraved craftsmanship, anodized treatment.

6. OEM style brass petcock drain much better than other plastic one on eBay

7. Carefully crafted to exceptional OE standards for precise fit.

 

 

AA5052 Aluminum Shroud and Fans:

The New Design fan and the AA5052 fan shroud effectively drive the heat over and out the engine compartment rather than thrusting it into the front of the engine. The fan shroud basically houses the fan blades securing it in place and keeping it from damaging the other engine components that may disturb the smooth and even operation of the engine. With excellent operating temperature management, allowable levels of engine temperature are stabilized. Investing in proper maintenance though will considerably benefit the ride and driving quality in maintaining the ideal working conditions of the engine.

 

1.Shuttered design AA5052 fan shroud to guaranteed airflow passes high efficiently.Make your engine bay perfect!

2. S blade fans, Push or Pull Type design,lightweight Plastic Durable Material.

3. Additional with thermostat,professional matching advice, consider for every detail and needed

 

Please Notice:

Please check the dimensions above carefully before you buy, thank you!

To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table.

Also review the notes section in the compatibility chart for additional specifications about this part.

1.Most of our orders ship within 1 business day after payment received.

(Except the pre-sale products and special cases)

2.Most of our products ship Australia Post , and we will provide the most reliable, preferential shipping service for you, if you do not receive your products on time, please contact us immediately, we will solve

your problem as soon as possible.

3.All items will be shipped to the PayPal verified address given to us, please verify your address before your purchase.
4.Note:Delivery is not available to Africa, Asia, Central America and Caribbean, Europe, Middle East, Oceania, Southeast Asia, South America, BM, CA, GL, MX, PM

- All our items are lifetime warrantied, if you want to return your item owing to the shipping damage, 

wrong purchase or other reasons, please contact us to request a return and learn the return policy.

1. All return items MUST be in brand new condition, which means the item is never installed and kept in the

original packaging, otherwise a 20% restocking fees will be charged.

2. All shipping and handling fees are non-refundable in any circumstances.

3. Please remember to email us which warehouse to send the item back before return.

NOTE: Please spend time confirming your vehicle model, parts size, etc. before purchasing, make sure it is

indeed exactly what you need, which can help prevent you from ordering the wrong item.

Any item/package broken or damaged in anyway during the shipping process, we purchase full insurance 

for this, however the damage must be reported to us within 3 days of receiving the package.

We are vehicle parts manufacturer, professional car part eBay seller. We have our own factory, our items  include car/motor radiators, intercooler, overflow tank,pipe hose, wheel spacers,etc., and will be shipped

from local place, All our items are factory price, negotiated price is acceptable. All our items are 

lifetime warrantied! 100% Quality Guarantee!

welcome to our store and contact with us if you have any question.