|
- Standard Photopolymer Resin
|
- Water Washable Resin
|
-
|
Surface Hardness (Shore D) |
80-85 |
80-85 |
75-80 |
Body Contraction (%) |
7%-9% |
6%-8% |
6%-8% |
Tensile strength (MPa) |
20-40 |
30-50 |
20-35 |
Elongation at break (%) |
5-15% |
8-14% |
15-25%
|
Bending strength (Mpa) |
25-45 |
35-55 |
20-40 |
Bending modulus (Mpa) |
650-900 |
800-1100 |
600-800 |
Bottom exposure time (s) |
Color screen machine 20-80; black and white screen machine 10-60 |
Color screen machine 30-80; black and white screen machine 10-60 |
Color screen machine20-80; black and white screen machine 10-60 |
Ground floor number |
3-5 |
3-5 |
3-5 |
Normal exposure time (s) |
Color Screen Machine 4-15; Black and White Screen Machine 2-4 |
Color Screen Machine 4-12; Black and White Screen Machine 1.5-3.5 |
Color Screen Machine 4-12; Black and White Screen Machine 1.5-4
|
Lifting distance (mm) |
6-10 |
6-10 |
6-10 |
Lifting speed (mm/min) |
60-120 |
60-120 |
60-90 |
Precautions:
1. Shake well before use. It is recommended to stand upside down three times. It is forbidden to use resin in places exposed to sunlight;
2. Do not take it orally, keep it away from children, wear gloves before use, avoid direct contact with the skin, and keep the room ventilated;
do not enter the eyes, if you accidentally touch it, rinse with plenty of water as soon as possible, and seek medical attention in time if you feel unwell;
3. The printed resin model needs to be cleaned with high-concentration alcohol (recommended concentration of 95% or more, the higher the better) for about 30s;
after cleaning, wait for the alcohol to dry and then perform secondary curing, so that the best performance can be obtained;
4. Do not pour the used resin in the trough back into the unused resin, and do not leave the resin in the trough for a long time without use.
The contamination of the resin affects the printing effect;
5. Store in the dark at room temperature. The ultraviolet rays in the sun will cure the photosensitive resin; it is recommended to store it at an ambient temperature of 15-35 °C.
The lower the temperature in winter, the higher the resin viscosity;
6. Sealed storage to avoid dust or moisture, which will affect the print quality