Bodenfeuchtesensor Bodenfeuchtigkeit DC 3.3-12 V Detektorsensor Feuchtigkeit
DESCRIPTION


Product Description:
100% brand new high quality
Made of high-quality materials for durability
Soil Moisture Hygrometer Moisture Detection Sensor + Corrosion Resistant Probe
Name: Soil Moisture Sensor
Size: 36*15*7mm
Line length: 5M
Voltage: DC 3.3-12V
Current: <20mA; <30mA (output)
Interface: + - do AO; DO digital value; AO analog value
Working temperature: -25~85 degrees Celsius
Application: It is used to detect soil moisture.
Principle: The soil moisture probe is used to detect humidity, and the voltage comparator is used to judge the amount of humidity; when the humidity is greater than the set value, DO output low level.

Usage introduction:
1. "+" is connected to the positive pole of the power supply; "-" is connected to the negative pole of the power supply. Do not connect it in reverse, otherwise it will burn the chip. After connecting, the "P" power indicator is on, and the module is working normally
2. Adjust the blue potentiometer clockwise/counterclockwise to increase/decrease the detection sensitivity. Take "Thermal Sensor" as an example, if the default triggers at 25°C, the DO output is active at low level; after clockwise adjustment, that is, when the temperature is lower than 25 degrees Celsius, it can trigger; if it is adjusted counterclockwise, it can trigger when it is higher than 25 degrees Celsius
3. When the potentiometer is adjusted clockwise until the "S" output indicator is on, it means that the adjustment range has exceeded the detection threshold; if it is adjusted counterclockwise to the maximum expansion, it will exceed the threshold. Please do not exceed the threshold when adjusting, otherwise it will not work normally. The potentiometer adjustment is only used for the DO port, and has nothing to do with the AO output
4. AO output is an analog value (voltage), which can be detected by the AD port of the microcontroller
When the detected value is greater than the set value, DO outputs a low level, the triode is turned on, and the load acts. 1K is the current limiting resistor, 10K is the DO port pull-up resistor
No complicated circuit is required, the AO port can collect voltage through the MCU AD port

Package Included:
1 * Soil Moisture Meter Humidity Detection Sensor Module with Wire for Arduino

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

POLICES

1.Die Bestellung wird innerhalb von 24 bis 48 Stunden nach Zahlungseingang behandelt.

2.Wir schicken die Waren nur an die Adresse aus, die auf Ihrem Paypalkonto angemeldet ist, und diese Adresse muss Ihrer Lieferanschrift entsprechen.

3.Die Lieferzeit ist abhängig von dem Kurierdienst.. Es dauert ca.10-25 Arbeitstage local in Deutschland, ca.10-30 Arbeitstage zu anderen europäischen Ländern. Die Lieferzeit darf sich zwishcen den Ferien ein bisschen verlängern.

4.Wenn Sie Ihre Ware innerhalb von 30 Arbeitstagen nach der Bezahlung nicht erhalten haben, kontaktieren Sie uns bitte sofort. Wir werden die Lieferung für Sie verfolgen und geben Ihnen schnellstmöglich eine Antowrt. Unser Ziel ist Ihre Zufriedenheit.

5. itte achten Sie auf die folgende Hinweise: wir bieten kein Kombi-Versand an, denn die Versandkosten sind nach Gewicht berechnet. Und der zusätzliche Artikel bedeutet dass, der gleiche Artikel mit gleicher Farbe und Größe.


1.Wir akzeptieren PayPal.
2.Alle Zahlungen müssen innerhalb von 4 Tagen nach dem Kauf gestellt werden
3.Nach abgeschlossener Transaktion geben Sie uns ein Feedback.
4.Wenn Sie aus irgendeinem Grund nicht zufrieden mit der Transaktion sind, kontaktieren Sie uns, um es vor der Platzierung eines nagative Feedback zu beheben.

1.Wir sind stets bestrebt, unseren Kunden hohe Produktqualität, günstige Preise, und hervorragenden Kundendienst anzubieten. Wenn Ihnen unsere Produkte gefallen, fügen Sie bitte meinen eBay-Shop zu Ihren bevorzugten Shops hin.

2. Ihre besseren Kommentare werden eine Ermutigung für uns sein, die bessere Qualität und den besseren Service in Zukunft anzubieten.

3.Wenn Sie nicht mit ihnen zufrieden sind, kontaktieren Sie uns bitte zuerst über eine Frage oder über den Verkäufer kontaktieren. Ihre Nachrichten werden innerhalb von 1-2 Werktagen beantwortet. Wir werden unser Bestes versuchen, Ihr Problem zu Ihrer Zufriedenheit zu lösen.



Am 15.12.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques