PACKAGE CONTENT:( NOT include Raspberry Pi board.)
R800C GSM/GPRS HAT x1
GSM Antenna x1
RPi screws pack (2pcs) x1
WIKI English manual: www.waveshare.com/wiki/R800C_GSM/GPRS_HAT
Support 2G Communication, Phone Call & SMS
The R800C GSM/GPRS HAT is a handy, low power Raspberry Pi HAT which features multi-communication functionalities: GSM, GPRS, and phone call, applicable to countries or regions with 2G network coverage, up to 85.6kbps GPRS speed. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, and so on.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc.
UART interface, for connecting controller boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, switch to 5V via jumper
2x LED indicators, easy to monitor the working status
SIM card slot, supports 1.8V/3V SIM card
Baudrate: 2400bps ~ 115200bps (115200bps by default)
Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
Supports SIM application toolkit: GSM 11.14 Release 99
Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
GSM / GPRS / AUDIO | |
Frequency band | GSM: 850/900/1800/1900 MHz Quad-band auto search Compliant to GSM phase 2/2+ |
Emitting power | Class 4 (2W @ 900 MHz) Class 1 (1W @ 1800 MHz) |
GPRS connectivity | GPRS multi-slot class 12/10 (default) GPRS multi-slot class 1~12 (configurable) |
GPRS data feature | UL/DL speed: ≤85.6kbps Supports Packet Broadcast Control Channel (PBCCH) Coding schemes: CS-1, CS-2, CS-3, CS-4 Supports PAP (Password Authentication Protocol) for PPP connection Supports Unstructured Supplementary Service Data (USSD) |
SMS | Supports: MT, MO, CB, Text, PDU SMS storage: SIM card |
Audio | Voice encode/decode mode: Half Rate, Full Rate, Enhanced Full Rate, Adaptive Multi Rate Support echo cancellation Support noise reduction |
OTHERS | |
Power supply | 5V |
Logic level | 5V / 3.3V (default) |
Operating temperature | -40°C ~ 85°C |
Storage temperature | -45°C ~ 90°C |
Dimensions | 30.2 x 65mm |
Compatible With Raspberry Pi Series Boards, Jetson Nano
Connecting with Raspberry Pi Zero
Connecting with Raspberry Pi 4B
Connecting with Jetson Nano
Connecting with Jetson Nano LITE
* For reference only, the above controller boards are not included.
Making Telephone Call Or Sending SMS By AT Commands, With Onboard Audio Jack
R800C module
RT9193-33 power chip
MIC29302 power chip
TXS0108EPWR voltage translator translates 3.3V/5V into 1.8V
Raspberry Pi GPIO Header for connecting with Raspberry Pi
Operating voltage selection jumper VCC-3.3V: set operating voltage as 3.3V VCC-5V: set operating voltage as 5V
PWR selection jumper PWR-P4: startup/shutdown by the Raspberry Pi P4 pin
3.5mm earphone/mic jack
R800C control header for easily connecting with host boards like STM32
GSM Antenna Connector
SIM Card slot
R800C power on/off Press for 1s to start up the R800C. Press for 1s to shutdown the R800C after booting
NET Indicator Fast flashing when module starts, flashing slowly after GSM register succeed
Power Indicator