0438100064 fuel distributor Peugeot 505 Repair Kit Fuel Distributor

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


T&S Engineering

!Repair kit including installation instructions!

for

Bosch fuel distributor (fuel distributor)

The repair kit is for 4-cylinder cast iron flow dividers with an adjustable upper housing part.
 
Flow divider number: 0438100064

Please compare the number of your flow divider
(found on a tag on the black cast iron body)
with the numbers listed here. 

To seal the metal membrane on the housing, the upper and lower parts are additionally Hylomar M needed.
You can find it in our shop under the article number: 383239527529

We offer the individual repair kit for each fuel distributor , as these were also manufactured with different sealing membranes.

Search by vehicle list:


          • PEUGEOT 505 2.0i 71KW/ 96HP 2.0l 10.1985 - 06.1987


        • All sealing rings made of FKM / Viton.
          Only parts from German production.
          All sealing rings that are necessary for the repair are included in the set incl. 2 stainless steel washers to adjust the pressure regulator.
          The sealing membrane is made with a tolerance of 0.01mm. manufactured.
          We offer the individual sealing set for each gray cast iron flow divider, since not every flow fuel distributor is the same.
          Some gasket sets are offered as "fits all".
          That's not the case.


The installation instructions will be sent to the email address stored on Ebay after purchase.

The installation instructions will be sent to the e-mail address stored on Ebay after purchase.



In our shop you will also find accessories suitable for your fuel distributor .

All O-rings are packaged in the appropriate fuel distributor to fit the flow divider, so there is no need to look for the right O-ring! Since some of the O-rings only differ in size very slightly, if the wrong size is used, the O-ring could shear off and lead to the failure of the flow divider after a short time. You are also welcome to send the fuel distributor to us after the repair so that we can check and adjust it. 

 MADE IN GERMANY. 
We offer the individual repair kit for each fuel distributor , as these were also manufactured with different sealing membranes. All sealing rings that are necessary for the repair are included in the set incl. 2 stainless steel washers to adjust the pressure regulator. We offer the individual sealing set for each gray cast iron flow divider, since not every flow fuel distributor is the same. All O-rings are packaged in the appropriate fuel distributor to fit the flow divider, so there is no need to look for the right O-ring! Since some of the O-rings only differ in size very slightly, if the wrong size is used, the O-ring could shear off and lead to the failure of the flow divider after a short time. You are also welcome to send the fuel distributor to us after the repair so that we can c
Im Lieferumfang enthalten Dichtung
Im Lieferumfang enthalten O-Dichtungsring
Im Lieferumfang enthalten Dichtungsring
Hersteller Markenlos
EAN Nicht zutreffend
Anschlussart Hohlschraube
Kraftstoffart Benzin
OE/OEM Referenznummer(n) 0438100064
Herstellernummer TS 004 02 02
Produktgruppe Motorteile
Produkttyp Dichtung
Herstellungsland und -region Deutschland
Vergleichsnummer 0438100064
Produktart Reparatursatz/Dichtsatz