wireless microphone set stage K song computer audio mobile phone live sound card microphone

 

Features:

* 6.5mm audio connector, suitable for most audio equipment with 6.5mm interface, plug and play, very convenient.

* Wide range of application, suitable for square stage audio, lever audio, mixer, power amplifier, computer, TV, teaching machine and other equipment with microphone jacks.

* Cardioid directivity, intelligent attenuation, can effectively prevent howling under the premise of ensuring the sound, effectively isolate the noise source, and reduce the use of unwanted sounds from the side or back.

* Sensitive moving coil microphone. Using high-fidelity microphone core, cardioid pointing, sensitive and clear pickup, using noise suppression technology, greatly reducing howling interference, the sound quality is pure and beautiful.

* Thickened metal mesh cover, using heat treatment technology, anti-drop and no deformation, built-in high-efficiency filter cotton, effectively filter wind and noise.

* Plug and play, no setup required. The receiver is plugged into the 6.5mm microphone jack of the speaker, and it can be used when it is turned on.

* 100m remote reception. The diameter of the built-in transmitting coil is greatly increased to ensure stable signal enhancement.

 

Specification:

Name: Wireless Microphone Set

Mute Control: Lock Noise

Frequency offset: ±11kHz

Frequency Response: 80Hz-15kHz

Frequency Stability: ±0.005%

Signal-to-noise ratio: >60dB

Distortion: 0.5% (1kHz)

Number of channels: two channels

Sensitivity: -70dB M

Use distance: 50 meters in open area

Receiver power supply: DC 12V/320mA

Transmitter power supply: AA battery

Transmit power: 20mW

Frequency range: 200MHz-270MHz

Output mode: independent and mixed automatic selection

 

Transmitter:

Frequency stability: ±0.005%

Carrier output power: ≤30mW

Spurious radiation suppression: >40dB

Modulation method: vhf

Maximum modulation: ±75KHz

Pickup method: (condenser) (LWM-6188/C)

 

Receiver:

Receive Sensitivity: <2μV

Image rejection: >40dB

Audio output impedance: 600Ω

Audio output level: 0-0.5V

Power supply: AC220-240V 50/60Hz

Power Consumption: 1W

 

Packing included:

2 * Microphone

1 * Receiver

1 * charging cable

1 * 6.5mm to 3.5mm audio interface

 

Note:

1. Due to manual measurements and slight color variations, please allow 1-3 cm (0.4-1.18 inches) difference to suit different display settings.

2. Due to the light and screen difference, the item's color may be slightly different from the pictures. Please understand.