FUNCTIONAL DESCRIPTION

1. Upgraded sensors and transmission range is up to 328ft/100m

2. 3 channel can be connected at the same time.The parcel just includes 1sensor,if you want to get more sensor,you can contact with us.

3. Forecasting,calculate and record data of temperature and humidity,showing in the main unit.You can make a plan ahead.Choosing suitable clothes ,data and time to go out.

4. Please place sensor in an open area in case that to get the accurate data.

·Temperature and humidity detection cycle:

--main unit: 10s or 30s ,depends on indoor temperature more of less that 1.8°F/1°C in 1 minute.

--Remote sensor: Channel 1 for 31s /Channel 2 for 32s /Channel 3 for 33s

5. This is a adjustable screen backlight.The main unit can be powered by batteries (not included )and charger.But the sensor just can be powered by batteries (not included ).When powered by batteries,the backlight will light on for 10s in order to save power.When powered by charger,the backlight will be turn off only when search for WWVB signal.Other time the backlight will be on all the time.

6. It is easy to set a clock to asking you do something you have planned ahead.It has a great influence on which you are tired of your working.

NOTE

● The equipment should be protected from moisture、dust、extreme temperature and direct sunlight

● Do not put the main unit and wireless sensor directly on the ground

● When replacing the battery, if the charging cable is not connected, all settings will be lost

● When installing the device on the wall, there must be no cables, gas pipes or water pipes on the wall of the installation site

More Information

1.The default time zone of the main unit is Pacific Time. If you need to choose a time zone that suits your location, please press "DOWN" for 3 seconds to exit the WWVB signal search mode,and then set the time according to your location.

2. Indicator of mildew

It will be shown the indoor indicator of mildew for pressing once.

The outdoor indicator of mildew will appear for pressing twice.

3. Pressing the button of "UP" continuously to display the maximum/minimum temperature and humidity.

• Press once: display the maximum value

• Press twice: display the minimum value

• Press three times: return to normal mode

• Pressing "UP" for 3 seconds to delete the highest/lowest temperature and humidity recorded since midnight.

Parcel Content

1.Main Unit

2.Sensor(just 1 sensor)

3.Chargeable cable

4.Manual

5.Key Function Manual