Product description:
light Source Model:COB Chip,super bright
Power: 40W
Lumen:3800LM
Operating voltage:DC9-32V
Beam Type:High beam & Low beam
Material: Aluminum PCB and PA66+30% GF Plastic
Beam Angle:360°
Color Temperature: 6000K Cool White
Lifespan:over 30000h
Working Temperature: -40-+80 Centigrade
Waterproof rate: IP 68
Connector Type:Plug and Play
Application :LED Headlights Headlamp Lamp Bulbs High or Low Beam
Color Temperature: Pure White 6000K
IP68 rated water and dust seal,over 30000hrs lifetime
light Source Model:COB Chip,super bright
Power: 40W
Lumen:3800LM
Operating voltage:DC9-32V
Beam Type:High beam & Low beam
Material: Aluminum PCB and PA66+30% GF Plastic
Beam Angle:360°
Color Temperature: 6000K Cool White
Lifespan:over 30000h
Working Temperature: -40-+80 Centigrade
Waterproof rate: IP 68
Connector Type:Plug and Play
Application :LED Headlights Headlamp Lamp Bulbs High or Low Beam
Color Temperature: Pure White 6000K
IP68 rated water and dust seal,over 30000hrs lifetime
Usage: Headlight
(2pcs/set) COB Hi-Lo Beam LED headlight conversion kit
Latest COB chip light source,/360 degree no blind zone
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay
Two-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2.High speed mute fan (12000R/Min),high Air flow for faster cooling rate
Package Included:
4PC LED Light
9005 (High Beam) + 9006 (Low Beam)
Note:
If you are unsure the item fit or not, please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
If you are unsure the item fit or not, please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
On Apr 30, 2024 at 07:04:47 PDT, seller added the following information: