Aufzugwelle FLUME RONDA DCN
- nicht in der Liste: Anfragen bitte mit
- Hersteller und Werknummer oder
- Flume Nr. oder
- DCN Nr. oder
- Ronda Nr.
- für mechanische Armbanduhren
- Taschenuhren (siehe Liste unten)
- Gebot gilt für eine Aufzugwelle
- Wellentyp Gruppe A bis Y siehe Bilder
Wd = für wasserdichte Gehäuse (male bzw. female Ausführung)
Aufzugwellen Armbanduhrwerke nach Hersteller sortiert
Alpina 872 874 = W3347
AS 1710-1713 1814 1816 1847-1849 1857-1859 1901-1906 ff (11.5‘‘‘)/W3149
AS 1800-1803 1940 1941 1950 1951 /W3086
AS 1830-1839 1871-1876 1985-1996/W3335
AS 1977-5 = W3438
Baumgartner 844 896 Gew. 0,9mm/W3422
Baumgartner 844 896 Gew. 1,2mm/W3422
BIFORA 69 691 /W3207
BOREL 25 CORTEBERT 304-306 CYMA 504 DOXA 89 = W3151
BRAC 500-518 Ges. Länge 16mm/W3210
Bulova 7 AA AH AK /W3148
Cattin 64/W3116
Cattin 66 (11.5’’’)/W3119
Certina 13-50 13-51/W3206
Certina 25-02 = W3275
Certina 605 = W3514
Citizen 5200-5270 5400-5470 6400/W3332
Cortebert 307 Wd Male R1684 = W3244
CORTEBERT 317 318 = W3086
Cupillard 233-68-233-70 256-10 256-11/W3218
Diehl 620 = W3124
DUGENA 1190 1191 3008 3009 3017 3023 = W3086
Dugena 1215 /W3115
DUGENA 2307-2310 = W3389
DUGENA 2508-2517 2520-2523 = W3380
DUGENA 3304 3305 3308 3309 3330 3331 = W3151
DUGENA 3324 3325 3332 3334-3337 3345 = W3275
Dugena 3365 3367 = W3514
DUGENA 3502 = W3393
DUGENA 3610 FHF 37 371 372 374 378 (8.75‘‘‘)/W3420
DUGENA 4700 LORSA 83 83G 8B 8F/W3121
Dugena 608 1198 3803 3804 3805 3806 Wd Male R1684 = W3244
DUGENA 683 1034 1064 1065 1183 2502-2507 2518 = W3227
DUGENA 713 714 2001 2002 = W3207
DUGENA 780-782 784 1018 1019 1080 1081 = W3151
DUGENA 961 2202 OTERO 64/W3102
Durowe INT 7410 u.v.m. (Ronda 64/300/118/86/62) /W3278
Emes 17a 18a = W3153
Eta 2451-2456 2459-2463 2465-2474/W3226
Eta 2451-2456 2459-2463 2465-2474 Wd female/W3226
ETA 2540 2541 2544 2545 2550 2551 2570 2580 /W3151
ETA 2640 (7.75‘‘‘)/W3519
ETA 2641 2648 2651 2658 2661 2668 2671 2678 Vierkant gedreht/W3418
ETA 2750 2752 2758 2762 2768 /W3275
Eta 2763 2769 2781 2783 2784 2789-91/W3394
ETA 2770-2774 2776 2778 2779 2782 2788 = W3275
ETA 2801 ETA 2824 ETA 2824 ETA 2824 (11.5/13‘‘‘) (49/285/108/61/38 schräg)/W3408
ETA 2850-2853 2858 2859 2870-2873 2878 2879/W3514
ETA 551.111 551.111 551.121 551.411 951.111 Vierkant gedreht = W3418
ETA-ESA 9360-9362 = W3514
Eterna 12801 12824 Eterna 12825 Eterna 12825 (11.5/13‘‘‘) = W3408
FE 140 140.1 140.2 140A 140.1A 140.2A ff/W3384
FE 233-68-233-70 256-10 256-11 = W3218
FE 4601/W3524
FEF 430 434 1270-1275 6600 6620 6650 /W3347
FEF 6600 6620 6630 6631 6700 6701 6710 6711 6720 6721 /W3393
Felsa 4520 = W3115
FHF (11.5’’’) 97 974/W3386
FHF 36 36-21 63 63-2 362 /W3235
FHF 81 82 811 814 815 821 811-2 81-2 821-4 82-4/W3146
Förster 400 412 420 422 426 451 453 /W3389
Förster FB 11.5''' 200-228 /W3217
Girard-Perregaux 091 Oris 366 Wd Male R1684 = W3244
Girard-Perregaux
504 = W3393
Heuer Leonidas Trackmaster Rallye Stoppuhr Timer Aufzugwelle grün mit Krone
INT Durowe 1980 /W3438
Jaeger LeCoultre 489 814 815 825 Memovox/W3147
Jeambrun / FE 3600-3602 3610-3612 Ges. Länge 16mm/W3246
Jeambrun / FE 3600-3602 3610-3612 Ges. Länge 18mm/W3246
Jeambrun / FE 3600-3602 3610-3612 Ges. Länge 20mm/W3246
Junghans 620 620.00-620.03 620.10-620.12/W3124
Junghans 600 600.10 600.11 600.12 600.30/W3268
Junghans 623.00-623.25 625.00-625.25/W3436
Junghans 655.02 655.03 = W3389
JUNGHANS 672 672.50 672.51/W3245
Junghans 84 ff 684 ff 685 ff 687 ff Gewinde 0,9mm/W3144
Junghans J93 J93/1 693.00 ff Ges. Länge 14mm Schaft 3mm/W3267
Junghans J98 698.70 ff Ges. Länge 14mm Schaft 3mm = W3267
Juvenia 1165 = W3393
Kienzle 059/B25/W3145
Kienzle 51/0 ff 51/01-51/04 51/72 051a50 ff 051N50 ff/W3159
Liengme 3051-3061/W3249
LONGINES 370 /W3242
Longines 450/W3259
MSR T4 T5 T43-T57/W3237
Oris 632 635 645 648 725 /W3266
Osco 800 850 /W3150
Parrenin 45 66 /W3153
Peseux 7040 7046 7050 7056 Wd Male R1684/W3244
Poljot 2415 1216/W3224
PUW 460-464 1460-1464/W3227
PUW 560-565 1560-1565 /W3380
PUW 801 803 810/W3657
RONDA 1011 1013 1015 1017 1031 1033 1035 1037 /W3215
RONDA 1211 1213 1215 1217 1231 = W3215
Ronda 9011 9013 9015 9017 9013-21 9015-21 9017-21 /W3388
Sefea INT 36 360 362 = W3235
Seiko 6602B 6640A 6659A = W3181
Seiko 66A 66B 205 375 463 957 4361 (50/333/110/65/44 R1587)/W3181
Slava 2414/W3415
ST Standard (11.5’’’) 97 974 = W3386
STANDARD ST 1800 1801 1802 1803 1940 1941 1950 1951 = W3086
TE 3600-3602 3610 3611 3612 = W3246
Tissot 725 = W3115
Unbekannte Werk/W3107
Unbekannte Werk/W3449
Unbekannte Werk/W3646
Valjoux 7730-7737 Gewinde 0,9mm/W3371
Valjoux 7750 7751 7753 7754 7758 Gewinde 0,9mm /W3706
Valjoux 7750 7751 7753 7754 7758 Gewinde 1,2mm /W3706
Valjoux 7760 7761 7765 7754 7768 7770 Gewinde 0,9mm = W3706
Valjoux 7760 7761 7765 7754 7768 7770 Gewinde 1,2mm = W3706
Venus 150 152 175 178 179 188 200 206 Gewinde 0,9mm = W3371
Wostok 2209 2214 2239/W3084
Zenith 46.0 = W3514
Aufzugwellen Taschenuhren und Stoppuhren nach Flume Ronda DCN Nummer
Aufzugwellen sortiert nach Hersteller
Lanco = Langendorf
Tavannes = Cyma
Alpina 222 = J 48 W288
AM 8 Tage Werk (130/645/180/225/Vierkant/88) G=Vierkant mit Krone Gruppe A; Wxxx2
AM 54 (19’’’) G=1,45mm Gruppe B; W1603; DCN1699
Arsa 426 (18.75’’’) G=1,5mm Gruppe B; W1598;
AS 1052 (16-17’’’) G=1,2mm Gruppe A; W1429; DCN1858
AS 1054 1063 1064 1067 1068 (16-17’’’) = AS 1052
AS 1071 1072 1080 1182 1183 1184 1185 (16-17’’’) = AS 1052
Beguelin = Damas
BTC = Damas
Nidor = Buser
Buser 25/12 120 141 (19’’’) G=1,2mm Gruppe B; W227; DCN130
Buser N (19’’’) G=1,6mm Gruppe B; W237; DCN129
Buren (19’’’) G=1,45mm Gruppe A; W1564; DCN775
Buren (19’’’) G=1,5mm Gruppe A = W1564 G=1,45mm
Corgemont (18’’’) G=1,35mm Gruppe B; W236
Corgemont (19’’’) G=1,6mm Gruppe B; W242; DCN222
Cortebert 473 (18-19’’’) G=1,8mm Gruppe A; W1499; DCN1275
Cortebert 474 476 477 484 486 487 495 (18-19’’’) = Cortebert 473
Cortebert 516 517 518 519 523 (16.5/17.75’’’) G=1,3mm Gruppe B; W223; DCN397
Cortebert 590 592 593 (18’’’) G=1,3mm Gruppe B; W1781; DCN635
Cortebert 620 622 (16’’’) G=1,2mm Gruppe B; W1437; DCN1452
Crettiez 22 (18.5‘‘‘) G=1,45mm Gruppe A; DCN1876
Cyma 6 (19’’’) = Tissot 43 W1758 DCN632 DCN1539
Cyma 734 (17’’’) G=1,5mm Gruppe B; W233; W1755; DCN471; R1040
Cyma 735 736 737 768 769 774 775 776 777 778 779 u.a. (17’’’) = Cyma 734
Cyma 704 (16/17/18‘‘‘) G=1,1/1,2/1,3mm Gruppe B; W224; W1488; DCN220
Cyma 1-3 (16.5‘‘‘) G=1,5mm Gruppe B; W1426;DCN 395; DCN2205
Cyma 4 7 540 541 570 571 572 573 640 641 670 671 1929 (15.5/16.5‘‘‘) = Cyma 1-3
Cyma 8 15 (17/19‘‘‘) G=1,5mm Gruppe B; W231; DCN470
Cyma 914 915 920 921 (19‘‘‘) G=1,5mm Gruppe B; W238; DCN472
Cyma 740-743 750-753 764-767 780-783 790-793 (17/19‘‘‘) = Cyma 8 15
Cyma 1B 18 30 707 710 711 712 713 784 786 787 (16/17/18‘‘‘) = Cyma 704
Damas 23 (16-18‘‘‘) G=1,3mm Gruppe A; W1412; DCN2721
Derby 27 (16.5‘‘‘) G=1,3mm Gruppe B; W1539; DCN1934
Doxa (24‘‘‘) G=2,2mm Gruppe A; DCN400
Doxa 1 (19‘‘‘) G=1,5mm Gruppe A; W1616; DCN113
Election (17‘‘‘) G=1,5mm Gruppe B; W232
Elida (19‘‘‘) G=1,5mm Gruppe A; W262
Eterna 131 (17‘‘‘) G=1,5mm Gruppe B; W254
Eterna 62 (19''') G=1,5mm Gruppe A; W281
Eterna 165 (19''') G=1,5mm Gruppe A; W256; DCN119
Eterna 403 467 (18''') G=1,5mm Gruppe A; W260; DCN118
Favor 6 14 406 412 (19‘‘‘) G=1,1mm Gruppe B; W289; DCN910
FEF 40H 41H ff (19’’’) G=1,6mm Gruppe A; W275; DCN2209; R964
FHF 2124/26 (19‘‘‘) G=1,5mm Gruppe A; W1572; DCN237
FHF 3344 (19‘‘‘) G=1,5mm Gruppe B; W234; DCN1557
FHF 2144-2146 4144-4146 u.a. (19‘‘‘) = FHF 2124/26
Hanhart 36 38 46 48 56 58 71 ff (19‘‘‘) Stoppuhr G=Vierkant Gruppe B; W1823; DCN9088
Hanhart Bobby 23 27 28 29 (19‘‘‘)G=Vierkant Gruppe B; DCN2922; DCN2923
Havila 2 (19‘‘‘) G=1,9mm Gruppe B; DCN241
IWC 73 74 77 (17’’’) G=1,0mm Gruppe B; W221; W1477; DCN142
IWC 52 53 57 65 (18/19’’’) G=1,3mm Gruppe A; W252; DCN141
Jeambrun 30 (18’’’) G=1,5mm Gruppe A; W1546; DCN1877
Junghans J47 (18.5’’’) G=1,3/1,35mm Gruppe B; W294; DCN2963
Junghans J9 J13 J26 (18.5’’’) G= Vierkant Gruppe B; W297; DCN167
Junghans J15 J17 (19’’’) G=1,4 Gruppe B; W298; DCN989
Junghans J48 J49 (18.5’’’) G=1,35mm Gruppe B; W288; DCN1611; DCN2898
Junghans J24 (18.5’’’) G=1,3mm Gruppe B; W1773; DCN2894
Junghans J29 J29/I (17’’’) G=Vierkant Gruppe C; W1723; DCN1708
Junghans J29 J29/I (17’’’) mit Original Junghans Krone
Junghans J52 (17’’’) G=Vierkant Gruppe C; W1707; DCN691
Junghans J38 (18.5’’’) G=Vierkant Gruppe B; W299; DCN1279
Junghans J26 J31 J32 J33 (18.5’’’) G=Vierkant Gruppe B; W300; DCN169
Junghans J41 J42 (19’’’) G=1,4mm Gruppe A; W324; DCN1609
Landeron 2124 = FHF 2124
Langendorf 2-19''' Savonette = AM 54 W1603
Langendorf 467 (18''') G=1,2mm Gruppe A; W1647; DCN1808
Langendorf 550 (18''') G=1,5mm Gruppe A; W1643; DCN560
Lavina 101 102 104 106 (15-16’’’) G=1,2mm Gruppe A; W1790; DCN1827; DCN10066
Lemania 8 Tage Werk (21‘‘‘) G=1,45mm Gruppe A; W1674; DCN2372
Liengme (19‘‘‘) G=1,5mm Gruppe A; DCN586
Longines 18.69N (18‘‘‘) G=1,5mm Gruppe A; W267; DCN202; DCN629; DCN2165
Longines 18.68N (18‘‘‘) G=1,5mm Gruppe A; W267; DCN680
Longines 18.25ABC 18.26ABC (18‘‘‘) G=1,5mm Gruppe A; W265
Longines 18.79 (17‘‘‘) G=1,5mm Gruppe A; W1456; DCN686; R884
Longines 18.79 (17‘‘‘) G=1,5mm Gruppe A; W251 (alt); DCN204; R987
Longines 37.93 (17‘‘‘) G=1,45mm Gruppe A; W1657; DCN1444
Longines 37.9 (17‘‘‘) G=1,5mm Gruppe A; W1413; DCN1791
Longines 18.80 (18‘‘‘) G=1,35mm Gruppe A; DCN445; R987
Longines 18.90 G=1,35mm Gruppe A; DCN676;
Longines 18L (18‘‘‘) G=1,5mm Gruppe A; DCN682; R988
Longines 19.95 G=2,2mm Gruppe A; DCN1172
Longines 18.69 A G=2,2mm Gruppe A; DCN 1795
Longines 18LS 18.50 18.50N 18.65 (18‘‘‘) (98/620/150/190/150/74) = Longines 18L
Moeris C neg. (17‘‘‘) G=1,5mm Gruppe Q; W1460
MST 6 8 (18‘‘‘) G=1,5mm Gruppe C; DCN246
Omega flach (9‘‘‘) G=1,0mm Gruppe B; W225
Omega 5 (19‘‘‘) G=2,5mm Gruppe Q; W284
Omega 40.6 (17‘‘‘) G=1,5mm Gruppe B; W239; DCN116
Omega 37.6 38.5 (17‘‘‘) G=1,5mm Gruppe B; W1517; DCN210
Omega (17-19‘‘‘) G=2,1mm Gruppe B; W249; DCN114
Omega (18-20‘‘‘) G=1,5mm Gruppe B; W248; DCN115
Omega PH (18‘‘‘) G=1,5mm Gruppe B; DCN117
Oris 33 78 (19‘‘‘) G=1,25mm Gruppe B; W1633
Oris 91 92 93 99 100 (13‘‘‘) G=1,4mm Gruppe B; W911; DCN1220
Reconvilier 38 (17‘‘‘)G=Vierkant Gruppe B; DCN1743;
Record 431 433 (19’’’) G=1,5mm Gruppe A; W1761; DCN2046
Record 6 (18.5’’’) G=1,3/1,4mm Gruppe B; W235; DCN257
Revue 33 (17.75’’’) G=1,5mm Gruppe B; W230; DCN213
Revue 30 31 (19’’’) G=1,65mm Gruppe B; W244; W1620; DCN125
Revue 36 (17.75’’’) G=1,2mm Gruppe B; W226; DCN255
Revue 51 52 53 (16.75/17.75/18.5‘‘‘) G=1,2mm Gruppe B; W1524; DCN779
Sonceboz 170/AM 8 Tage Werk (19‘‘‘) G=1,55mm mit Krone Gruppe A; W1600
Sonceboz 99 (18/19‘‘‘) G=1,5mm Gruppe B; W240; DCN1025
Thiel Saturn (19’’’) G=Vierkant Gruppe B; W1712; DCN2918
Tissot 38.2 40.5 210 (17-18’’’) G=1,4mm Gruppe A; W1508; DCN716; R121
Tissot 43 43A 43B (19’’’) G=1,5mm Gruppe A; W1758; DCN632; DCN1539
Unitas 34 (16.5-19‘‘‘) G=1,2mm Gruppe B; W229; W1818; DCN1754
Unitas 85 226 233 285 293 497 498 (16.5-19‘‘‘) = Unitas 34
Unitas 83 (16.5-17.75‘‘‘) G=1,2mm Gruppe A; W1818; DCN811
Unitas 84 86 87 88 143 144 (16.5-17.75‘‘‘) = Unitas 83
Unitas (18.5‘‘‘) G=1,5mm Gruppe B; W241; R886
Unitas 33 34 233 (18.5-19‘‘‘) G=1,2mm Gruppe B; W229; DCN908; DCN1754
Unitas 64 (18.5‘‘‘) G=1,2mm Gruppe B = W299 W1490
Unitas 285 293 497 (17.75‘‘‘) G=1,2mm Gruppe B = W299 W1490
Valjoux 68 (16-17‘‘‘) G=1,5mm Gruppe L; W1753; DCN2582
Venus 133 (16/18‘‘‘) G=1,2mm Gruppe B; W1757; DCN1676
Unbekannt (125/295/-/190/Vierkant/85) G=Vierkant Gruppe C; Wxxx1
Zenith 177 (17‘‘‘) G=1,45mm Gruppe B; W1838; DCN1763
Zenith flach (18.5/19‘‘‘) G=1,45mm Gruppe Q; W282; DCN1717
Zenith flach NVSI (19‘‘‘) G=1,85mm Gruppe Q; W283; DCN144
Zenith NVSI 69 (19‘‘‘) G=1,75mm Gruppe Q; W286; DCN10139
Aufzugwellen Taschenuhren und Stoppuhren nach Abmessungen (siehe Bild)
(A/E/B/C/D/F) Ronda D = G= od. Vierkant (siehe Bild)
Angaben 1/10 mm
(73/620/110/130/135/49) Longines 18.90 G=1,45mm Gruppe A; DCN676;
(80/610/180/-/100/73) Omega G=1,0mm Gruppe B; W225
(110/790/190/150/220/70) G=2,2 mm Gruppe A; DCN1795; (DCN1172)
(125/295/-/190/Vierkant/85) Unbekannt G=Vierkant Gruppe C; Wxxx1
(125/630/195/-/Vierkant/100) Reconvilier 38 (17‘‘‘)G=Vierkant Gruppe B; DCN1743;
(125/650/-/200/Vierkant/100) Hanhart Bobby 23 27 28 29 (19‘‘‘)G=Vierkant Gruppe B; DCN2923;
(125/910/170/220/150/90) Record 431 433 (19’’’) G=1,5mm Gruppe A; W1761; DCN2046
(130/645/180/225/Vierkant/88) AM 8 Tage Werk G=Vierkant mit Krone Gruppe A; Wxxx2
(135/695/180/235/155/82) Sonceboz 170/AM 8 Tage Werk (19‘‘‘) G=1,55mm mit Krone Gruppe A; W1600;
(130/810/225/170/220/100) Doxa (24‘‘‘) G=2,2mm Gruppe A; DCN400
(145/730/225/-/190/103) Havila 2 (19‘‘‘) G=1,9mm Gruppe B; DCN241
Bitte beachten Sie meine
anderen Auktionen. Kombiversand beim Kauf weiterer Artikel wird angeboten.
VERSANDKOSTEN Übersicht:
Deutschland:
1,20 € Brief (bis 50 g)
4,00 € Einschreiben Einwurf (bis 50 g)
Hinweis: Verkäufer ist im Verpackungsregister LUCID
registriert.
Das Impressum sowie die Informationen zur Plattform der
EU-Kommission zur Online-Streitbeilegung erreichen Sie durch Klicken auf:
„Rechtliche Informationen des Verkäufers".
Die genannten Markennamen sind Eigentum ihrer jeweiligen Eigentümer bzw. Lizenzinhaber und dienen lediglich zur Produktbeschreibung.
Stems for Wristwatch and Pocketwatch Movements - Vintage - Repair
Flume System of Watch stems
- Flume Stem Type see Pictures
- Stem measures: Lists see Pictures
Parts not listed: please ask for availability
Please ask for more information
or details.
Combined shipment available.
Please see my other auction items.
Europe:
max. weight 50g
max. shipping measures 23 x 12 x 1 cm
3,90 € Economy International no longer available due to lost shipments
6,90 € Standard International (registered, tracking)